Bump version to v1.10

DSView/CMakeLists.txt

@@ -106,8 +106,8 @@ set(DS_TITLE DSView)
 set(DS_DESCRIPTION "A GUI for instruments of DreamSourceLab")
 
 set(DS_VERSION_MAJOR 1)
-set(DS_VERSION_MINOR 0)
-set(DS_VERSION_MICRO 1)
+set(DS_VERSION_MINOR 1)
+set(DS_VERSION_MICRO 0)
 set(DS_VERSION_STRING
 	${DS_VERSION_MAJOR}.${DS_VERSION_MINOR}.${DS_VERSION_MICRO}
 )

DSView/res/DSCope1.def25.dsc

@@ -1,7 +1,7 @@
 {
     "Device": "DSCope",
     "DeviceMode": 1,
-    "Horizontal trigger position": "0",
+    "Horizontal trigger position": "50",
     "Language": 25,
     "Operation Mode": "正常",
     "Time base": "10000",

DSView/res/DSCope1.def31.dsc

@@ -1,7 +1,7 @@
 {
     "Device": "DSCope",
     "DeviceMode": 1,
-    "Horizontal trigger position": "0",
+    "Horizontal trigger position": "50",
     "Language": 31,
     "Operation Mode": "Normal",
     "Time base": "10000",

DSView/res/DSLogic1.def25.dsc

@@ -4,7 +4,7 @@
     "DeviceMode": 1,
     "Enable RLE Compress": 1,
     "Filter Targets": "无",
-    "Horizontal trigger position": "0",
+    "Horizontal trigger position": "50",
     "Language": 25,
     "Max Height": "1X",
     "Operation Mode": "Stream模式",

DSView/res/DSLogic1.def31.dsc

@@ -4,7 +4,7 @@
     "DeviceMode": 1,
     "Enable RLE Compress": 1,
     "Filter Targets": "None",
-    "Horizontal trigger position": "0",
+    "Horizontal trigger position": "50",
     "Language": 31,
     "Max Height": "1X",
     "Operation Mode": "Stream Mode",

NEWS25

@@ -1,3 +1,41 @@
+1.10 -- (2020-02-22)
+-----------------
+  （通用）
+  *增加DSCope U3P100设备（100M带宽/1G采样率/USB3.0示波器）的支持
+  *增加DSLogic U3Pro32设备（32通道/1G采样率/USB3.0逻辑分析仪）的支持
+  *增加DSCope U2B100设备（100M带宽/1G采样率/USB2.0示波器）的支持
+  *增加DSLogic U3Pro16设备（16通道/1G采样率/USB3.0逻辑分析仪）的支持
+  *增加设备类型的显示(USB 2.0 / USB 3.0 / 演示设备 / 文件)
+  *增加FPGA固件版本check
+  *改进文件保存的默认名称和路径记忆
+  *修复一些显示和界面语言问题
+
+  （逻辑分析仪）
+  *扩展触发通道，支持到最高32通道
+  *修复PS/2协议的解析问题（#239）
+  *修复cec协议的解析问题（#235）
+  *修复解码文件导出的ID问题（#237）
+  *修复高级触发的取反逻辑无法正常工作的问题
+  *修复其它显示问题
+
+  （示波器）
+  *改进高频信号触发的波形抖动问题
+  *修复降采样时，采样点选取错误的问题
+  *增加20M带宽限制选项（仅DSCope U2B100和DSCope U3P100设备）
+  *改进数据捕获和波形显示的同步方式
+  *修复stop条件下，改变垂直灵敏度和偏移可能导致波形显示和测量结果不正确的问题
+  *修复roll模式下，改变垂直偏移导致波形重头开始采集的问题
+  *修复在等待触发的条件下，math通道的水平分辨率无法改变的问题
+  *修复在等待触发的条件下，已采集的波形无法改变垂直偏移的问题
+  *修复自动测量的参数未自动清除，以及显示的抖动问题
+  *修复光标和鼠标跟随测量，在某些条件下显示不正确的问题
+  *修复某些条件下切换触发源，可能导致波形无法正常触发的问题
+
+  （数据记录仪）
+  *修复垂直偏移没有和硬件设置同步的问题
+  *修复某些极端情况下，大量波形压缩显示时可能出现的问题
+  *增加波形结果的鼠标跟随测量
+
 1.01 -- (2019-09-15)
 -----------------
   （通用）

NEWS31

@@ -1,3 +1,41 @@
+1.10 -- (2020-02-22)
+-----------------
+  --common
+  *add support for DSCope U3P100 device (100M bandwidth/1G samplerate/USB3.0 oscilloscope)
+  *add support for DSLogic U3Pro32 device (32 channels/1G samplerate/USB3.0 logic analyzer)
+  *add support for DSCope U2B100 device (100M bandwidth/1G samplerate/USB2.0 oscilloscope)
+  *add support for DSLogic U3Pro16 device (16 channels/1G samplerate/USB3.0 logic analyzer)
+  *add display of device type (USB 2.0 / USB 3.0 / Demo / File)
+  *add version check for FPGA firmware
+  *improve the default file name when saving/exporting files
+  *fix other display and language issue
+
+  --for logic analyzer
+  *extend channel support for trigger up to 32 channels
+  *fix issue of ps/2 decoder (#239)
+  *fix issue of cec decoder (#235)
+  *fix ID issue when export results of decoder (#237)
+  *fix "not" logic don't work in advance trigger
+  *fix other display issues
+
+  --for oscilloscope
+  *improve wave shake issue when trig high freqency signals
+  *fix sampling point selection issue of downsampling
+  *add 20M bandwidth limitation for DSCope U2B100 / DSCope U3P100 devices
+  *improve synchronism between data acquisition and wave dispaly
+  *fix wave display and measurement issue when change vdiv and offset after stop
+  *fix capture restart issue when change offset in roll mode
+  *fix issue of timebase of math channel can't be changed when waiting trigger
+  *fix issue of offset can't be changed when waiting trigger
+  *fix clear and flicker issue of auto measurements
+  *fix cursor and mouse measurements issue after change samplerate when waiting trigger
+  *fix trigger issue when toggle between different trigger source
+
+  --for data acquisiton
+  *fix hardware offset setting issue
+  *fix mipmap issue of long time data at some case
+  *add cursor and mouse measurements
+
 1.01 -- (2019-09-15)
 -----------------
   --common