openwrt/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3715i.dts

// SPDX-License-Identifier: GPL-2.0-or-later or MIT

#include <dt-bindings/gpio/gpio.h>

/include/ "fsl/p1010si-pre.dtsi"

/ {
	model = "Enterasys WS-AP3715i";
	compatible = "enterasys,ws-ap3715i";

	aliases {
		led-boot = &led_power_green;
		led-failsafe = &led_power_red;
		led-running = &led_power_green;
		led-upgrade = &led_power_red;
		label-mac-device = &enet0;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x10000000>;
	};
	
	leds {
		compatible = "gpio-leds";

		wifi1 {
			gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
			label = "green:radio1";
			linux,default-trigger = "phy1tpt";
		};

		wifi2 {
			gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
			label = "green:radio2";
			linux,default-trigger = "phy0tpt";
		};

		led_power_green: power_green {
			gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
			label = "green:power";
		};

		led_power_red: power_red {
			gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
			label = "red:power";
		};

		lan1_red {
			gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
			label = "red:lan1";
		};

		lan1_green {
			gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
			label = "green:lan1";
		};

		lan2_red {
			gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>;
			label = "red:lan2";
		};

		lan2_green {
			gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
			label = "green:lan2";
		};
	};

	soc: soc@ffe00000 {
		ranges = <0x0 0x0 0xffe00000 0x100000>;

		gpio0: gpio-controller@fc00 {
		};

		usb@22000 {
			status = "disabled";
		};

		mdio@24000 {
			phy0: ethernet-phy@0 {
				reg = <0x1>;
			};

			phy2: ethernet-phy@2 {
				reg = <0x2>;
			};
		};

		mdio@25000 {
			tbi_phy: tbi-phy@11 {
				reg = <0x11>;
			};
		};

		mdio@26000 {
			status = "disabled";
		};

		enet0: ethernet@b0000 {
			phy-handle = <&phy0>;
			phy-connection-type = "rgmii-id";

			label = "lan1";
		};

		enet1: ethernet@b1000 {
			phy-handle = <&phy2>;
			phy-connection-type = "sgmii";

			tbi-handle = <&tbi_phy>;

			label = "lan2";
		};

		enet2: ethernet@b2000 {
			status = "disabled";
		};

		sdhc@2e000 {
			status = "disabled";
		};
	};

	ifc: ifc@ffe1e000 {
	};

	pci0: pcie@ffe09000 {
		reg = <0 0xffe09000 0 0x1000>;
		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0xa0000000
				  0x2000000 0x0 0xa0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;

			wifi@0,0,0 {
				compatible = "pci168c,0033";
				reg = <0x0 0 0 0 0>;
				ieee80211-freq-limit = <2400000 2500000>;
			};
		};
	};

	pci1: pcie@ffe0a000 {
		reg = <0 0xffe0a000 0 0x1000>;
		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
		pcie@0 {
			ranges = <0x2000000 0x0 0x80000000
				  0x2000000 0x0 0x80000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;
			
			wifi@0,0,0 {
				compatible = "pci168c,0033";
				reg = <0x0 0 0 0 0>;
				ieee80211-freq-limit = <5000000 6000000>;
			};
		};
	};
};

&soc {
	led_spi {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;

		sck-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
		mosi-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
		num-chipselects = <0>;

		spi_gpio: led_gpio@0 {
			compatible = "fairchild,74hc595";
			reg = <0>;
			gpio-controller;
			#gpio-cells = <2>;
			registers-number = <1>;
			spi-max-frequency = <100000>;
		};
	};

	spi0: spi@7000 {
		flash@0 {
			compatible = "jedec,spi-nor";
			reg = <0>;
			spi-max-frequency = <25000000>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					reg = <0x0 0xa0000>;
					label = "boot-bak";
					read-only;
				};

				partition@a0000 {
					reg = <0xa0000 0xa0000>;
					label = "boot-pri";
					read-only;
				};

				partition@120000 {
					reg = <0x120000 0x10000>;
					label = "cfg1";
					read-only;
				};

				partition@130000 {
					reg = <0x130000 0x10000>;
					label = "cfg2";
					read-only;
				};

				partition@140000 {
					compatible = "denx,uimage";
					reg = <0x140000 0x1d80000>;
					label = "firmware";
				};

				partition@1ec0000 {
					reg = <0x1ec0000 0x100000>;
					label = "nvram";
					read-only;
				};
			};
		};
	};
};

/include/ "fsl/p1010si-post.dtsi"

/ {
	cpus {
		PowerPC,P1010@0 {
			bus-frequency = <399999996>;
			timebase-frequency = <50000000>;
			clock-frequency = <799999992>;
			d-cache-block-size = <0x20>;
			d-cache-size = <0x8000>;
			d-cache-sets = <0x80>;
			i-cache-block-size = <0x20>;
			i-cache-size = <0x8000>;
			i-cache-sets = <0x80>;
		};
	};

	soc@ffe00000 {
		bus-frequency = <399999996>;

		serial@4600 {
			clock-frequency = <399999996>;
			status = "disabled";
		};

		serial@4500 {
			clock-frequency = <399999996>;
		};

		pic@40000 {
			clock-frequency = <399999996>;
		};
	};
};

/*
 * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
 * aliases to determine PCI domain numbers, drop aliases so as not to
 * change the sysfs path of our wireless netdevs.
 */

/ {
	aliases {
		/delete-property/ pci0;
		/delete-property/ pci1;
	};
};