forked from Ivasoft/openwrt
f2e1d37381
Motivation: Firmware with platform ID "XR450" required for easy installation. Manufacturer pages: Product page: https://www.netgear.com/support/product/xr450 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip Specifications: Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500) Differences: Platform ID: XR450, utilized for firmware validation WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256) SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB Wireless: Qualcomm Atheros QCA9984 Switch: Qualcomm Atheros AR8337 rev. 2 Ethernet: 5x 1000/100/10 USB: 2x 3.0 Install via WEB GUI (recommended): 1. Navigate within GUI to firmware update section 2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img 3. Dismiss downgrade warning Install via TFTP recovery (same as XR500/R7800): 1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing 2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process Revert to stock firmware 1. Download current manufacturer firmware, decompress zip file to obtain img file 2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img) ipq806x: add support to netgear_xr450 Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
108 lines
2.7 KiB
Plaintext
108 lines
2.7 KiB
Plaintext
#
|
|
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
|
# Copyright (c) 2011-2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
arris,tr4400-v2)
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth2"
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "0u@eth0"
|
|
;;
|
|
askey,rt4230w-rev6 |\
|
|
asrock,g10 |\
|
|
nec,wg2600hp)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
|
|
;;
|
|
buffalo,wxr-2533dhp |\
|
|
compex,wpq864 |\
|
|
netgear,d7800 |\
|
|
netgear,r7500 |\
|
|
netgear,r7500v2 |\
|
|
qcom,ipq8064-ap148)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
|
|
;;
|
|
edgecore,ecw5410)
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
|
;;
|
|
linksys,ea7500-v1)
|
|
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
|
|
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
|
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
|
;;
|
|
linksys,ea8500)
|
|
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
|
|
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
|
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
|
;;
|
|
meraki,mr42)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
meraki,mr52)
|
|
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
|
;;
|
|
nec,wg2600hp3)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
|
|
;;
|
|
netgear,r7800 |\
|
|
netgear,xr450 |\
|
|
netgear,xr500 |\
|
|
tplink,c2600 |\
|
|
tplink,vr2600v)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
|
|
;;
|
|
qcom,ipq8064-ap161)
|
|
ucidef_set_interface_lan "eth1 eth2"
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
|
|
;;
|
|
qcom,ipq8064-db149)
|
|
ucidef_set_interface_lan "eth1 eth2 eth3"
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
|
|
;;
|
|
tplink,ad7200)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
|
|
;;
|
|
asus,onhub |\
|
|
tplink,onhub)
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "6@eth1" "2:wan" "0@eth0"
|
|
;;
|
|
nokia,ac400i |\
|
|
ubnt,unifi-ac-hd)
|
|
ucidef_set_interface_lan "eth0 eth1"
|
|
;;
|
|
zyxel,nbg6817)
|
|
hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
|
|
ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
|
|
ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
|
|
;;
|
|
*)
|
|
echo "Unsupported hardware. Network interfaces not intialized"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|