forked from Ivasoft/openwrt
ac68fbf526
I-O DATA WN-DEAX1800GR is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (Nanya NT5CC128M16JR-EK) - Flash : RAW NAND 128 MiB (Winbond W29N01HVSINF) - WLAN : 2.4/5 GHz (MediaTek MT7915) - Ethernet : 5x 10/100/1000 Mbps - Switch : MT7530 (SoC) - LEDs/Keys : 6x/3x - UART : through-hole on PCB (J2) - assignment: 3.3V, GND, TX, RX from "1" marking - settings : 115200n8 - Power : 12 VDC, 1 A Flash instruction using initramfs-factory image: 1. Boot WN-DEAX1800GR normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs-factory.bin image and click update ("更新") button to perform firmware update 4. On the initramfs image, perform sysupgrade with the squashfs-sysupgrade.bin image 5. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on the flash storage. In this support, the first one will be used. Warning: - Do not use "saveenv" command on U-Boot CLI. This device has wrong u-boot-env data. The actual length of individual env data installed to the device is 0x1000 (4 KiB), but installed U-Boot requires 0x20000 (128 KiB). So U-Boot determines the data is invalid. Then, if you perform saving environment data with saveenv on U-Boot CLI, installed env data will be overwritten with too few default values without individual values (SSID, password, MAC addresses, etc...). MAC addresses: LAN : 50:41:B9:xx:xx:F4 (Config, ethaddr (text)) WAN : 50:41:B9:xx:xx:F6 (Config, wanaddr (text)) 2.4 GHz: 50:41:B9:xx:xx:F4 (Config, rmac (text) / Factory, 0x4 (hex)) 5 GHz : 50:41:B9:xx:xx:F5 (none) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
177 lines
4.0 KiB
Bash
Executable File
177 lines
4.0 KiB
Bash
Executable File
#
|
|
# Copyright (C) 2010 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
alfa-network,quad-e4g)
|
|
[ "$(fw_printenv -n dual_image 2>/dev/null)" = "1" ] &&\
|
|
[ -n "$(find_mtd_part backup)" ] && {
|
|
PART_NAME=backup
|
|
if [ "$(fw_printenv -n bootactive 2>/dev/null)" = "1" ]; then
|
|
fw_setenv bootactive 2 || exit 1
|
|
else
|
|
fw_setenv bootactive 1 || exit 1
|
|
fi
|
|
}
|
|
;;
|
|
ampedwireless,ally-00x19k|\
|
|
ampedwireless,ally-r1900k)
|
|
if [ "$(fw_printenv --lock / -n bootImage 2>/dev/null)" != "0" ]; then
|
|
fw_setenv --lock / bootImage 0 || exit 1
|
|
fi
|
|
;;
|
|
mikrotik,ltap-2hnd|\
|
|
mikrotik,routerboard-750gr3|\
|
|
mikrotik,routerboard-760igs|\
|
|
mikrotik,routerboard-m11g|\
|
|
mikrotik,routerboard-m33g)
|
|
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
|
;;
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p)
|
|
echo "Backing up firmware"
|
|
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
|
|
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
|
|
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
|
|
;;
|
|
esac
|
|
|
|
case "$board" in
|
|
ampedwireless,ally-00x19k|\
|
|
ampedwireless,ally-r1900k|\
|
|
arcadyan,we420223-99|\
|
|
asus,rt-ac65p|\
|
|
asus,rt-ac85p|\
|
|
asus,rt-ax53u|\
|
|
asus,rt-ax54|\
|
|
beeline,smartbox-flash|\
|
|
beeline,smartbox-giga|\
|
|
beeline,smartbox-pro|\
|
|
beeline,smartbox-turbo|\
|
|
beeline,smartbox-turbo-plus|\
|
|
belkin,rt1800|\
|
|
dlink,dap-x1860-a1|\
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2640-a1|\
|
|
dlink,dir-2660-a1|\
|
|
dlink,dir-3060-a1|\
|
|
dlink,dir-853-a3|\
|
|
etisalat,s3|\
|
|
h3c,tx1800-plus|\
|
|
h3c,tx1801-plus|\
|
|
h3c,tx1806|\
|
|
haier,har-20s2u1|\
|
|
hiwifi,hc5962|\
|
|
iptime,a3004t|\
|
|
iptime,ax2004m|\
|
|
iptime,t5004|\
|
|
jcg,q20|\
|
|
linksys,e5600|\
|
|
linksys,e7350|\
|
|
linksys,ea6350-v4|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2|\
|
|
linksys,ea8100-v1|\
|
|
linksys,ea8100-v2|\
|
|
mts,wg430223|\
|
|
netgear,eax12|\
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6850|\
|
|
netgear,r6900-v2|\
|
|
netgear,r7200|\
|
|
netgear,r7450|\
|
|
netgear,wac104|\
|
|
netgear,wac124|\
|
|
netgear,wax202|\
|
|
netis,wf2881|\
|
|
raisecom,msg1500-x-00|\
|
|
rostelecom,rt-sf-1|\
|
|
sercomm,na502|\
|
|
sercomm,na502s|\
|
|
sim,simax1800t|\
|
|
tplink,ec330-g5u-v1|\
|
|
wifire,s1500-nbn|\
|
|
xiaomi,mi-router-3g|\
|
|
xiaomi,mi-router-3-pro|\
|
|
xiaomi,mi-router-4|\
|
|
xiaomi,mi-router-ac2100|\
|
|
xiaomi,mi-router-cr6606|\
|
|
xiaomi,mi-router-cr6608|\
|
|
xiaomi,mi-router-cr6609|\
|
|
xiaomi,redmi-router-ac2100|\
|
|
zyxel,nwa50ax|\
|
|
zyxel,nwa55axe)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-ax1167gr2|\
|
|
iodata,wn-ax2033gr|\
|
|
iodata,wn-dx1167r|\
|
|
iodata,wn-dx2033gr)
|
|
iodata_mstc_set_flag "debugflag" "factory" "0xfe75" "0,1" "1"
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-deax1800gr)
|
|
iodata_mstc_set_flag "bootnum" "working" "0x4" "0,1" "0"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
iodata,wn-dx1200gr)
|
|
iodata_mstc_set_flag "debugflag" "factory" "0x1fe75" "0,1" "1"
|
|
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
tplink,er605-v2)
|
|
echo "Upgrading tplink,er605-v2"
|
|
CI_UBIPART="firmware"
|
|
CI_KERNPART="kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
ubnt,edgerouter-x|\
|
|
ubnt,edgerouter-x-sfp)
|
|
platform_upgrade_ubnt_erx "$1"
|
|
;;
|
|
zyxel,lte3301-plus|\
|
|
zyxel,nr7101)
|
|
fw_setenv CheckBypass 0
|
|
fw_setenv Image1Stable 0
|
|
[ "$(fw_printenv -n BootingFlag)" = "0" ] || fw_setenv BootingFlag 0
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
zyxel,wap6805)
|
|
local kernel2_mtd="$(find_mtd_part Kernel2)"
|
|
[ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\
|
|
[ "$(hexdump -n 4 -s 104 -e '"%x"' $kernel2_mtd)" != "0" ] &&\
|
|
dd bs=4 count=1 seek=26 conv=notrunc if=/dev/zero of=$kernel2_mtd 2>/dev/null &&\
|
|
echo "Kernel2 sequence number was reset to 0"
|
|
CI_KERNPART="Kernel"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
zyxel,wsm20)
|
|
zyxel_mstc_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|