forked from Ivasoft/openwrt
5fc28ef479
Device specifications:
* Qualcomm/Atheros QCA9533 v2
* 650/600/217 MHz (CPU/DDR/AHB)
* 64 MB of RAM
* 16 MB of SPI NOR flash (mx25l12805d)
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 2x 10/100 Mbps Ethernet
* 2T2R 2.4 GHz Wi-Fi
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x fast ethernet
- eth0
+ Label: Ethernet 1
+ 24V passive POE (mode B)
+ used as WAN interface
- eth1
+ Label: Ethernet 2
+ 802.3af POE
+ builtin switch port 2
+ used as LAN interface
* 12-24V 1A DC
* internal antennas
Flashing instructions:
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
66 lines
1.5 KiB
Bash
66 lines
1.5 KiB
Bash
#
|
|
# Copyright (C) 2011 OpenWrt.org
|
|
#
|
|
|
|
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
redboot_fis_do_upgrade() {
|
|
local append
|
|
local sysup_file="$1"
|
|
local kern_part="$2"
|
|
local magic=$(get_magic_word "$sysup_file")
|
|
|
|
if [ "$magic" = "4349" ]; then
|
|
local kern_length=0x$(dd if="$sysup_file" bs=2 skip=1 count=4 2>/dev/null)
|
|
|
|
[ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
|
|
dd if="$sysup_file" bs=64k skip=1 2>/dev/null | \
|
|
mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs
|
|
|
|
elif [ "$magic" = "7379" ]; then
|
|
local board_dir=$(tar tf $sysup_file | grep -m 1 '^sysupgrade-.*/$')
|
|
local kern_length=$(tar xf $sysup_file ${board_dir}kernel -O | wc -c)
|
|
|
|
[ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
|
|
tar xf $sysup_file ${board_dir}kernel ${board_dir}root -O | \
|
|
mtd -r $append -F$kern_part:$kern_length:0x80060000,rootfs write - $kern_part:rootfs
|
|
|
|
else
|
|
echo "Unknown image, aborting!"
|
|
return 1
|
|
fi
|
|
}
|
|
|
|
platform_check_image() {
|
|
return 0
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
local board=$(board_name)
|
|
|
|
case "$board" in
|
|
adtran,bsap1800-v2|\
|
|
adtran,bsap1840)
|
|
redboot_fis_do_upgrade "$1" vmlinux_2
|
|
;;
|
|
jjplus,ja76pf2)
|
|
redboot_fis_do_upgrade "$1" linux
|
|
;;
|
|
plasmacloud,pa300)
|
|
PART_NAME="inactive"
|
|
platform_do_upgrade_dualboot_datachk "$1"
|
|
;;
|
|
ubnt,routerstation|\
|
|
ubnt,routerstation-pro)
|
|
redboot_fis_do_upgrade "$1" kernel
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|