forked from Ivasoft/openwrt
20f48c8ae3
Hardware: SoC: Lantiq VRX 220 CPU Cores: 2x MIPS 34Kc at 500 MHz RAM: 128 MiB 250 MHz Storage: 128 MiB NAND flash Ethernet: built-in Fast Ethernet switch, only port 2 is used Wireless: Atheros AR9287-BL1A b/g/n with 2 pcb antennas Modem: built-in A/VDSL2 modem DECT: Dialog SC14441 LEDs: 1 two-color, 4 one-color Buttons: 2 FXS: 1 port via TAE or RJ12 connector Everything except FXS/DECT works (no drivers for AVM's FXS implementation with SC14441). Installation: Use the eva_ramboot.py script to load an initramfs image on the device. Run it a few seconds after turning the device on. $ scripts/flashing eva_ramboot 192.168.178.1 bin/targets/lantiq/xrx200/openwrt-lantiq-xrx200-avm_fritz7412-initramfs-kernel.bin If it fails to find the device try the ip address 169.254.120.1. (Firmware updates or the recovery tool apparently change it.) IMPORTANT: set lzma compression in ramdisk options, bootloader stalls when receiving uncompressed images. The device will load it in ram and boot it. You can reach it under the openwrt default ip address 192.168.1.1. Check if the key linux_fs_start is not set to 1 in tffs: $ fritz_tffs_nand -d /dev/mtd1 -n linux_fs_start If it is set to 1, the bootloader will select the wrong set of partitions. Restart the box and install an FritzOS upgrade or do a recovery. Afterwards start again at step 1. Run sysupgrade to persistently install OpenWRT. Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.de> Signed-off-by: Andy Binder <AndyBinder@gmx.de>
261 lines
6.1 KiB
Bash
Executable File
261 lines
6.1 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2011-2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
. /lib/functions/lantiq.sh
|
|
|
|
board_config_update
|
|
|
|
vpi=1
|
|
vci=32
|
|
annex="a"
|
|
tone="av"
|
|
xfer_mode=""
|
|
encaps="llc"
|
|
payload="bridged"
|
|
lan_mac=""
|
|
wan_mac=""
|
|
interface_wan="dsl0"
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
audiocodes,mp-252)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
allnet,all0333cj)
|
|
annex="b"
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
arcadyan,arv4510pw)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
arcadyan,arv4520pw)
|
|
annex="b"
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
|
|
annex="b"
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
arcadyan,arv7506pw11)
|
|
annex="b"
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
arcadyan,arv7519pw)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
|
;;
|
|
|
|
arcadyan,arv7519rw22)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
|
|
;;
|
|
|
|
arcadyan,arv752dpw22|arcadyan,arv8539pw22)
|
|
annex="b"
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
alphanetworks,asl56026)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
|
|
ucidef_add_switch "switch0"\
|
|
"2:lan" "3:lan" "6t@eth0"
|
|
;;
|
|
|
|
bt,homehub-v2b)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
|
;;
|
|
|
|
bt,homehub-v3a)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
bt,homehub-v5a)
|
|
lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
netgear,dgn1000b)
|
|
annex="b"
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
netgear,dgn3500|netgear,dgn3500b)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
netgear,dm200)
|
|
lan_mac=$(mtd_get_mac_binary ART 0)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
lantiq,easy80920-nand|lantiq,easy80920-nor)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
avm,fritz3370-rev2-hynix|\
|
|
avm,fritz3370-rev2-micron)
|
|
annex="b"
|
|
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
|
|
wan_mac=$(macaddr_add "$lan_mac" 3)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
avm,fritz7312|\
|
|
avm,fritz7320)
|
|
annex="b"
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
avm,fritz7360sl)
|
|
annex="b"
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
avm,fritz7412)
|
|
tffsdev=$(find_mtd_chardev "nand-tffs")
|
|
annex="b"
|
|
lan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n maca)
|
|
wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
siemens,gigaset-sx76x)
|
|
annex="b"
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
zte,h201l)
|
|
annex="b"
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
|
;;
|
|
|
|
zyxel,p-2601hn)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
|
;;
|
|
|
|
zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
|
|
;;
|
|
|
|
tplink,tdw8970|tplink,tdw8980)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
arcadyan,vg3503j)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:2" "4:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
tplink,vr200|tplink,vr200v)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
|
|
;;
|
|
|
|
arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
|
|
annex="b"
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
|
|
wan_mac=$(mtd_get_mac_binary board_config 22)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
buffalo,wbmr-hp-g300h)
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
buffalo,wbmr-300hpd)
|
|
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
|
|
wan_mac="$lan_mac"
|
|
ucidef_add_switch "switch0" \
|
|
"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
|
|
;;
|
|
|
|
*)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
esac
|
|
|
|
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
|
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
|
|
|
|
if lantiq_is_vdsl_system; then
|
|
ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
|
|
else
|
|
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
|
fi
|
|
|
|
ucidef_set_interface_wan "$interface_wan" "pppoe"
|
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|
|
|