brcm63xx: add support for the Actiontec R1000H gateway

SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz)
Flash size: 32MB (split 16/16 dual boot)
RAM size: 64MB
Wireless: BCM432x 802.11a/b/g/n(pci)
Ethernet: Broadcom BCM53115
USB: 1 x USB 2.0

Known issues:
 - Unable to detect 53115 switch attached to MDIO. Not supported
 - No support for the cable port

More info on the device and the research can be found at:
http://www.actiontec.com/212.html

Same FCC ID as:
https://wikidevi.com/wiki/Actiontec_V1000H_(Telus)

Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca>
[jonas.gorski: fix commit subject/message]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

target/linux/brcm63xx/base-files/etc/board.d/01_leds

@@ -69,6 +69,9 @@ livebox1)
 	ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1"
 	ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0"
 	;;
+r1000h)
+	ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1" "usb2-port1"
+	;;
 r5010un_v2)
 	ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1"
 	;;

target/linux/brcm63xx/base-files/etc/board.d/02_network

@@ -12,6 +12,7 @@ case "$(brcm63xx_board_name)" in
 
 cvg834g |\
 evg2000 |\
+r1000h |\
 rta770bw |\
 rta770w |\
 spw303v |\

target/linux/brcm63xx/base-files/etc/diag.sh

@@ -114,6 +114,9 @@ set_state() {
 	p870hw-51a_v2)
 		status_led="P870HW-51a:green:power"
 		;;
+	r1000h)
+		status_led="R1000H:green:power"
+		;;
 	r5010un_v2)
 		status_led="R5010UNv2:green:power"
 		;;

target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc

@@ -25,6 +25,7 @@ case "$(brcm63xx_board_name)" in
 	hg622 |\
 	magic |\
 	p870hw-51a_v2 |\
+	r1000h |\
 	r5010un_v2 |\
 	rta770bw |\
 	rta770w |\

target/linux/brcm63xx/base-files/lib/brcm63xx.sh

@@ -21,6 +21,9 @@ brcm63xx_dt_detect() {
 	"ADB P.DG AV4202N")
 		board_name="av4202n"
 		;;
+	"Actiontec R1000H")
+		board_name="r1000h"
+		;;
 	"Alcatel RG100A")
 		board_name="rg100a"
 		;;