SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

lantiq: kernel 4.14: cleanup dts files

Browse Source 
Move common used parts to dtsi. Add labels to nodes and reference nodes
via labels in dts files.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin
2018-01-01 17:58:30 +01:00
parent 82ae68be70
commit f519fea4c6
55 changed files with 4058 additions and 4219 deletions
Download Patch File Download Diff File Expand all files Collapse all files

205
target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts
View File

@@ -25,97 +25,6 @@
reg = <0x0 0x8000000>;
};
fpi@10000000 {
localbus@0 {
nand-parts@0 {
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0x1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
nand-on-flash-bbt;
nand-ecc-strength = <3>;
nand-ecc-step-size = <256>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "uboot-env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@c0000 {
label = "unused";
reg = <0xc0000 0x40000>;
};
partition@100000 {
label = "ubi";
reg = <0x100000 0x7e80000>;
};
/*
* last 512 KiB are for the bad block table, not writable
*/
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain;
};
pcie_rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
lantiq,open-drain;
};
usb_vbus {
lantiq,pins = "io33";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
@@ -201,18 +110,6 @@
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,002d {
compatible = "pci168c,002d";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
qca,disable-5ghz;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
@@ -257,6 +154,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
reg = <0>;
phy0: ethernet-phy@0 {
reg = <0x0>;
@@ -280,3 +178,104 @@
};
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain;
};
pcie_rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
lantiq,open-drain;
};
usb_vbus {
lantiq,pins = "io33";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
&localbus {
nand@1 {
compatible = "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <0x1 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
nand-on-flash-bbt;
nand-ecc-strength = <3>;
nand-ecc-step-size = <256>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "uboot-env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@c0000 {
label = "unused";
reg = <0xc0000 0x40000>;
};
partition@100000 {
label = "ubi";
reg = <0x100000 0x7e80000>;
};
/*
* last 512 KiB are for the bad block table, not writable
*/
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@168c,002d {
compatible = "pci168c,002d";
reg = <0x7000 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
qca,disable-5ghz;
};
};
&usb0 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};