apm821xx: Add support for the Cisco Meraki MX60/MX60W

This patch adds support for the Cisco Meraki MX60/MX60W Security
Appliance. Flashing information can be found at
https://github.com/riptidewave93/LEDE-MX60

Specs are as follows:
AppliedMicro APM82181 SoC at 800MHz
1GiB NAND - Samsung K9K8G08U0D
512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC
Atheros AR8327-BL1A Gigabit Ethernet Switch
1x USB 2.0 Port

More info can be found at https://wiki.openwrt.org/toh/meraki/mx60

Cc: Christian Lamparter <chunkeey@gmail.com>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

target/linux/apm821xx/base-files/etc/board.d/01_leds

@@ -16,6 +16,14 @@ mr24)
 	ucidef_set_led_wlan "wlan4" "WLAN4" "mr24:green:wifi4" "phy0tpt"
 	;;
 
+mx60)
+	ucidef_set_led_switch "wan" "WAN" "mx60:green:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan1" "LAN1" "mx60:green:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "mx60:green:lan2" "switch0" "0x08"
+	ucidef_set_led_switch "lan3" "LAN3" "mx60:green:lan3" "switch0" "0x04"
+	ucidef_set_led_switch "lan4" "LAN4" "mx60:green:lan4" "switch0" "0x02"
+	;;
+
 mbl)
 	ucidef_set_led_ide "sata" "SATA" "mbl:blue:power"
 	;;

target/linux/apm821xx/base-files/etc/board.d/02_network

@@ -9,11 +9,12 @@ board_config_update
 board=$(apm821xx_board_name)
 
 case "$board" in
-mbl | \
+mbl|\
 mr24)
 	ucidef_set_interface_lan "eth0"
 	;;
 
+mx60|\
 wndr4700)
 	ucidef_add_switch "switch0" \
 		"0@eth0" "4:lan" "3:lan" "2:lan" "1:lan" "5:wan"

target/linux/apm821xx/base-files/etc/diag.sh

@@ -4,17 +4,14 @@
 . /lib/apm821xx.sh
 
 get_status_led() {
-	case $(apm821xx_board_name) in
-	mbl)
-		status_led="mbl:green:power"
-		;;
-
-	mr24)
-		status_led="mr24:green:power"
-		;;
+	local board=$(apm821xx_board_name)
 
+	case $board in
+	mbl|\
+	mr24|\
+	mx60|\
 	wndr4700)
-		status_led="wndr4700:green:power"
+		status_led="$board:green:power"
 		;;
 
 	*)

target/linux/apm821xx/base-files/lib/apm821xx.sh

@@ -14,6 +14,10 @@ apm821xx_board_detect() {
 		name="mr24"
 		;;
 
+	*"Meraki MX60/MX60W Security Appliance")
+		name="mx60"
+		;;
+
 	*"MyBook Live"*)
 		name="mbl"
 		;;

target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx

@@ -4,7 +4,8 @@
 
 preinit_set_mac_address() {
 	case $(apm821xx_board_name) in
-		mr24)
+		mr24|\
+		mx60)
 			mac_lan=$(mtd_get_mac_binary_ubi board-config 102)
 			[ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
 			;;

target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh

@@ -15,7 +15,8 @@ merakinand_do_kernel_check() {
 
 	# What is our kernel magic string?
 	case "$board_name" in
-	"mr24")
+	"mr24"|\
+	"mx60")
 		[ "$image_magic_word" == "8e73ed8a" ] && {
 			echo "pass" && return 0
 		}
@@ -33,7 +34,8 @@ merakinand_do_platform_check() {
 	local kernel_magic="$(merakinand_do_kernel_check $1 $2)"
 
 	case "$board_name" in
-	"mr24")
+	"mr24"|\
+	"mx60")
 		[ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && {
 			echo "Invalid sysupgrade file for $board_name"
 			return 1
@@ -54,7 +56,8 @@ merakinand_do_upgrade() {
 
 	# Do we need to do any platform tweaks?
 	case "$board_name" in
-	"mr24")
+	"mr24"|\
+	"mx60")
 		nand_do_upgrade $1
 		;;
 	*)

target/linux/apm821xx/base-files/lib/upgrade/platform.sh

@@ -16,7 +16,8 @@ platform_check_image() {
 		return $?;
 		;;
 
-	mr24)
+	mr24|\
+	mx60)
 		merakinand_do_platform_check $board "$1"
 		return $?;
 		;;
@@ -38,7 +39,8 @@ platform_pre_upgrade() {
 	local board=$(apm821xx_board_name)
 
 	case "$board" in
-	mr24)
+	mr24|\
+	mx60)
 		merakinand_do_upgrade "$1"
 		;;