mpc85xx: Add Aerohive HiveAP-330 Access Point

The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

target/linux/mpc85xx/base-files/etc/board.d/02_network

@@ -10,6 +10,9 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+hiveap-330)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
 tl-wdr4900-v1)
 	ucidef_add_switch "switch0" \
 		"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"

target/linux/mpc85xx/base-files/etc/diag.sh

@@ -5,11 +5,14 @@
 . /lib/functions/leds.sh
 
 get_status_led() {
-        case $(board_name) in
-        tl-wdr4900-v1)
-                status_led="tp-link:blue:system"
-                ;;
-        esac
+	case $(board_name) in
+	hiveap-330)
+		status_led="hiveap-330:green:tricolor0"
+		;;
+	tl-wdr4900-v1)
+		status_led="tp-link:blue:system"
+		;;
+esac
 }
 
 set_state() {