lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

target/linux/lantiq/files/arch/mips/boot/dts/GIGASX76X.dts

@@ -0,0 +1,130 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube";
+	model = "Gigaset SX761,SX762,SX763";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio_export {
+		compatible = "gpio-export";
+		#size-cells = <0>;
+
+		switch {
+			gpio-export,name = "switch";
+			gpio-export,output = <1>;
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		stp {
+			lantiq,groups = "stp";
+			lantiq,function = "stp";
+		};
+	};
+};
+
+
+&gpiomm {
+	status = "okay";
+	lantiq,shadow = <0x3>;
+};
+
+&gpios {
+	status = "okay";
+};
+
+&gsw {
+	phy-mode = "rmii";
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x30000>;
+			};
+
+			partition@10000 {
+				label = "uboot_env";
+				reg = <0x30000 0x10000>;
+			};
+
+			partition@40000 {
+				label = "firmware";
+				reg = <0x40000 0x7c0000>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+	status = "okay";
+	gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
+};