lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

target/linux/lantiq/files/arch/mips/boot/dts/FRITZ736X.dtsi

@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "vr9.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
+
+/ {
+	compatible = "avm,fritz736x", "lantiq,xway", "lantiq,vr9";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power_green;
+		led-failsafe = &power_red;
+		led-running = &power_green;
+		led-upgrade = &power_green;
+		led-dsl = &info_green;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x8000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		dect {
+			label = "dect";
+			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_PHONE>;
+		};
+
+		wifi {
+			label = "wifi";
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WLAN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		power_green: power {
+			gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		power_red: power2 {
+			gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
+		};
+
+		info_green: info_green {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi: wifi {
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		info_red: info_red {
+			gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
+		};
+
+		dect: dect {
+			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth0 {
+	lan: interface@0 {
+		compatible = "lantiq,xrx200-pdi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		mtd-mac-address = <&urlader 0xa91>;
+		mtd-mac-address-increment = <(-2)>;
+		lantiq,switch;
+
+		ethernet@0 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <0>;
+			phy-mode = "rmii";
+			phy-handle = <&phy0>;
+		};
+
+		ethernet@1 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <1>;
+			phy-mode = "rmii";
+			phy-handle = <&phy1>;
+		};
+
+		ethernet@2 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <2>;
+			phy-mode = "gmii";
+			phy-handle = <&phy11>;
+		};
+
+		ethernet@3 {
+			compatible = "lantiq,xrx200-pdi-port";
+			reg = <4>;
+			phy-mode = "gmii";
+			phy-handle = <&phy13>;
+		};
+	};
+
+	mdio@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		reg = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0x00>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x01>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+		};
+
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&gphy0 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		mdio {
+			lantiq,groups = "mdio";
+			lantiq,function = "mdio";
+		};
+
+		phy-rst {
+			lantiq,pins = "io37", "io44";
+			lantiq,pull = <0>;
+			lantiq,open-drain;
+			lantiq,output = <1>;
+		};
+	};
+
+};
+
+&pcie0 {
+	status = "okay";
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <1>;
+		#address-cells = <2>;
+		device_type = "pci";
+
+		wifi@168c,002e {
+			compatible = "pci168c,002e";
+			reg = <0 0 0 0 0>;
+			qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
+		};
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};