lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into the kernel 4.19 specific folder, no changes are done to the files in this commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-11-25 19:35:16 +01:00
parent bf21b6e44d
commit eee1b34ce6
116 changed files with 14836 additions and 0 deletions
--- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV4525PW.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/ARV4525PW.dts
@@ -0,0 +1,162 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
+	model = "Speedport W501V Typ A";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		/* we dont have a power led, lets use the online led */
+		led-boot = &online;
+		led-failsafe = &online;
+
+		led-dsl = &dsl;
+		led-internet = &online;
+		led-wifi = &wifi;
+	};
+
+	memory@0 {
+		reg = <0x0 0x2000000>;
+	};
+
+	ath5k_eep {
+		compatible = "ath5k,eeprom";
+		ath,eep-flash = <&boardconfig 0x400>;
+		ath,mac-offset = <0x0>;
+		ath,eep-swap;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		fxo {
+			label = "arv4525pw:green:festnetz";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		fxs {
+			label = "arv4525pw:green:internet";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		dsl: dsl {
+			label = "arv4525pw:green:t-dsl";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		wifi: wifi {
+			label = "arv4525pw:green:wlan";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		online: online {
+			label = "arv4525pw:green:online";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		pci_in {
+			lantiq,groups = "req1";
+			lantiq,function = "pci";
+			lantiq,open-drain = <1>;
+			lantiq,pull = <2>;
+			lantiq,output = <0>;
+		};
+		pci_out {
+			lantiq,groups = "gnt1";
+			lantiq,function = "pci";
+			lantiq,output = <1>;
+		};
+		pci_rst {
+			lantiq,pins = "io21";
+			lantiq,pull = <2>;
+			lantiq,output = <1>;
+		};
+		relay {
+			lantiq,pins = "io31";
+			lantiq,output = <1>;
+		};
+	};
+};
+
+/* #define ARV4525PW_PHYRESET	13 */
+&gsw {
+	phy-mode = "mii";
+	mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				label = "uboot_env";
+				reg = <0x10000 0x10000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "firmware";
+				reg = <0x20000 0x3d0000>;
+			};
+
+			boardconfig: partition@400000 {
+				label = "boardconfig";
+				reg = <0x3f0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+/* #define ARV4525PW_RELAY		31 */
+&vmmc {
+	status = "okay";
+	gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};