lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

target/linux/lantiq/files/arch/mips/boot/dts/ALL0333CJ.dts

@@ -0,0 +1,116 @@
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+/ {
+	compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase";
+	model = "Allnet ALL0333CJ DSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+
+		aliases {
+			led-boot = &power;
+			led-failsafe = &power;
+			led-running = &power;
+			led-upgrade = &power;
+
+			led-dsl = &dsl;
+			led-internet = &online_green;
+		};
+	};
+
+	memory@0 {
+		reg = <0x0 0x1000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/* power led: red=off, green=on */
+		power: power {
+			label = "all0333cj:green:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		lan: lan {
+			label = "all0333cj:green:lan";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		dsl: dsl {
+			label = "all0333cj:green:dsl";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		online_green: online {
+			label = "all0333cj:green:online";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		online_red {
+			label = "all0333cj:red:online";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		asc {
+			lantiq,groups = "asc";
+			lantiq,function = "asc";
+		};
+		keys_in {
+			lantiq,pins = "io0",/* "io25", */"io29";
+			lantiq,pull = <2>;
+			lantiq,open-drain = <1>;
+		};
+	};
+};
+
+&gsw {
+	phy-mode = "mii";
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x400000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x10000>;
+				read-only;
+			};
+
+			partition@10000 {
+				label = "firmware";
+				reg = <0x10000 0x3ef200>;
+			};
+
+			partition@3ff200 {
+				label = "uboot_env";
+				reg = <0x3ff200 0xc00>;
+				read-only;
+			};
+
+			partition@3ffe00 {
+				label = "dummy_bits";
+				reg = <0x3ffe00 0x200>;
+				read-only;
+			};
+		};
+	};
+};