lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts

@@ -0,0 +1,114 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+/ {
+	compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
+	model = "AudioCodes MediaPack MP-252";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		exin {
+			lantiq,groups = "exin1";
+			lantiq,function = "exin";
+		};
+		pci {
+			lantiq,groups = "gnt1", "req1";
+			lantiq,function = "pci";
+		};
+	};
+};
+
+&gsw {
+	phy-mode = "rmii";
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x20000>;
+				read-only;
+			};
+
+			partition@20000 {
+				label = "uboot_env";
+				reg = <0x20000 0x20000>;
+			};
+
+			partition@40000 {
+				label = "boardconfig";
+				reg = <0x40000 0x60000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "firmware";
+				reg = <0xa0000 0xf20000>;
+			};
+
+			partition@fc0000 {
+				label = "sysconfig";
+				reg = <0xfc0000 0x40000>;
+			};
+
+			partition@0x1000000 {
+				label = "rootfs_data";
+				reg = <0x1000000 0x1000000>;
+			};
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+	status = "okay";
+	gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
+};