SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for Enterasys WS-AP3705i

Browse Source 
Hardware
--------
SoC:    Atheros AR9344
RAM:    128M DDR2
FLASH:  2x Macronix MX25L12845EM
        2x 16MiB SPI-NOR
WLAN2:  Atheros AR9344 2x2 2T2R
WLAN5:  Atheros AR9580 2x2 2T2R
SERIAL: Cisco-RJ45 on the back (115200 8n1)

Installation
------------

The U-Boot CLI is password protected (using the same credentials as the
OS). Default is admin/new2day.

1. Download the OpenWrt initramfs-image. Place it into a TFTP server
   root directory and rename it to 1401A8C0.img. Configure the TFTP
   server to listen at 192.168.1.66/24.

2. Connect the TFTP server to the access point.

3. Connect to the serial console of the access point. Attach power and
   interrupt the boot procedure when prompted (bootdelay is 1 second).

4. Configure the U-Boot environment for booting OpenWrt from Ram and
   flash:

   $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000'
   $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
     tftpboot 0x85000000; bootm'
   $ setenv bootcmd 'run boot_openwrt'
   $ saveenv

5. Load OpenWrt into memory:

   $ run ramboot_openwrt

   Wait for the image to boot.

6. Transfer the OpenWrt sysupgrade image to the device. Write the image
   to flash using sysupgrade:

   $ sysupgrade -n /path/to/openwrt-sysuograde.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
2020-05-19 22:49:35 +02:00
parent a9f7510150
commit ebddc5f984
6 changed files with 261 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -95,7 +95,8 @@ comfast,cf-ew72)
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
;;
comfast,cf-wr752ac-v1|\
engenius,ecb1750)
engenius,ecb1750|\
enterasys,ws-ap3705i)
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
;;
devolo,magic-2-wifi)

4
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -22,6 +22,7 @@ ath79_setup_interfaces()
devolo,dvl1750x|\
dlink,dir-505|\
engenius,ecb1750|\
enterasys,ws-ap3705i|\
glinet,gl-ar300m-lite|\
netgear,ex6400|\
netgear,ex7300|\
@@ -400,6 +401,9 @@ ath79_setup_macs()
ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
;;
enterasys,ws-ap3705i)
label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
;;
iodata,etg3-r)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" -1)

8
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@@ -43,6 +43,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
;;
enterasys,ws-ap3705i)
caldata_extract "calibrate" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
;;
nec,wg800hp)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
@@ -72,6 +76,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x440
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
;;
enterasys,ws-ap3705i)
caldata_extract "calibrate" 0x5000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
;;
ocedo,raccoon|\
tplink,tl-wdr3500-v1|\
tplink,tl-wdr3600-v1|\