SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

filogic: add support for ASUS TUF-AX4200

Browse Source 
Hardware
--------
SOC:   MediaTek MT7986
RAM:   512MB DDR3
FLASH: 256MB SPI-NAND (Winbond W25N02KV)
WIFI:  Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH:   MediaTek MT7531 Switch
       MaxLinear GPY211C 2.5 N-Base-T PHY
UART:  3V3 115200 8N1 (Pinout silkscreened / Do not ocnnect VCC)

Installation
------------

1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
   reachable at 192.168.1.66/24. Rename the image to tufax4200.bin.

2. Connect the TFTP server to the AX4200. Conect to the serial console,
   interrupt the autoboot process by pressing '4' when prompted.

3. Download & Boot the OpenWrt initramfs image.

   $ setenv ipaddr 192.168.1.1
   $ setenv serverip 192.168.1.66
   $ tftpboot 0x46000000 tufax4200.bin
   $ bootm 0x46000000

4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
   using scp and install using sysupgrade.

   $ sysupgrade -n <path-to-sysupgrade.bin>

Missing features
----------------

 - The LAN port LEDs are driven by the switch but OpenWrt does not
   correctly configure the output.

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
2023-01-26 17:39:43 +01:00
parent 652d5ac152
commit e7c399bee6
7 changed files with 368 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata Normal file
View File

@@ -0,0 +1,21 @@
#!/bin/sh
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/caldata.sh
board=$(board_name)
case "$FIRMWARE" in
"mediatek/mt7986_eeprom_mt7976_dbdc.bin")
case "$board" in
asus,tuf-ax4200)
CI_UBIPART="UBI_DEV"
caldata_extract_ubi "Factory" 0x0 0x1000
;;
esac
;;
*)
exit 1
;;
esac