SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for OCEDO Ursus

Browse Source 
SOC:   Qualcomm Atheros QCA9558
RAM:   128MB
FLASH: 16MB (Macronix MX25L12845EMI-10G)
WLAN1: QCA9558 2.4GHz 802.11bgn 3SS
WLAN2: QCA9880 5GHz 802.11ac 3SS
LED:   Power, LAN1, LAN2, 2.4GHz, 5GHz
Serial:Next to SPI Flash,
       Pinout is 3V3 - GND - TX - RX (Square Pin is 3V3)
       The Serial setting is 115200-8-N-1

INSTALLATION:

1. Serve an OpenWrt ramdisk image named "ursus.bin".
   Set your IP-address to 192.168.100.8/24.
2. Connect to the serial. Power up the device and interrupt
   the boot process.
3. Set the correct bootcmd with
   > setenv bootcmd run bootcmd_1
   > saveenv
4. Run
   > tftpboot 0x81000000 ursus.bin
   > bootm 0x81000000
5. Wait for OpenWrt to boot up.
6. Transfer OpenWrt sysupdate image and flash via sysupgrade.

Signed-off-by: Markus Scheck <markus.scheck1@gmail.com>
Tested-by: David Bauer <mail@david-bauer.net>
[whitespace fix, renamed LED labels and SoC type fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Markus Scheck
2019-03-21 16:43:27 +01:00
committed by Petr Štetiar
parent 189aa1748b
commit de2f888024
4 changed files with 160 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/base-files/etc/board.d/02_network
View File

@@ -79,7 +79,8 @@ ath79_setup_interfaces()
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
devolo,dvl1200e|\
devolo,dvl1750e)
devolo,dvl1750e|\
ocedo,ursus)
ucidef_set_interface_lan "eth0 eth1"
;;
dlink,dir-825-b1)

3
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -119,7 +119,8 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
;;
ocedo,koala)
ocedo,koala|\
ocedo,ursus)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
;;