SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for TP-Link CPE610 v2

Browse Source 
TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 1x 10/100 Mbps Ethernet
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 23dBi high-gain directional 2×2 MIMO antenna and a
   dedicated metal reflector
 - Power, LAN, WLAN5G green LEDs
 - 3x green RSSI LEDs

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
This commit is contained in:
Andrew Cameron
2020-06-18 08:25:43 -05:00
committed by Adrian Schmutzler
parent 9a477b833a
commit d93da0d016
5 changed files with 88 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -243,6 +243,9 @@ tplink,cpe510-v3)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
;;
tplink,cpe610-v1|\
tplink,cpe610-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,tl-wr902ac-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0"

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -39,6 +39,7 @@ ath79_setup_interfaces()
tplink,cpe510-v2|\
tplink,cpe510-v3|\
tplink,cpe610-v1|\
tplink,cpe610-v2|\
tplink,re350k-v1|\
tplink,re355-v1|\
tplink,re450-v1|\