SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: Add support for TP-Link TL-WR1043N v5

Browse Source 
Specifications:

 - QCA9563 at 775 MHz
 - 64 MB RAM Zentel A3R12E40CBF-8E
 - 16 MB flash Winbond W25Q128FVSG
 - 3 (non-detachable) Antennas / 450 Mbit
 - 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
 - reset and Wi-Fi buttons

TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option. It also has different partitioning scheme.

The software is more in line with the Archer series in that it uses a
nested bootloader scheme.

(This has been adapted from the OpenWrt Wiki page)
<https://openwrt.org/toh/tp-link/tl-wr1043nd>

Installation on HW rev.5:

Factory firmware can be installed via the WEB interface.

Alternatively, it is also possible to use a TFTP server
for recovery purposes:
 - Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin
 - Set static IP of your PC to *192.168.0.66*
 - Router will obtain IP 192.168.0.86 for a few seconds while
   loading, when reset button pressed at power On.

And finally, there's always u-boot access through the UART.
For information visit the wiki.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[reworked commit message]
This commit is contained in:
Adrian Schmutzler
2019-05-06 15:29:16 +02:00
committed by Christian Lamparter
parent 78ea648a3a
commit d4b89b7170
4 changed files with 90 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/base-files/etc/board.d/01_leds
View File

@@ -110,7 +110,8 @@ tplink,archer-c7-v5)
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
tplink,archer-c2-v3|\
tplink,tl-wr1043nd-v4)
tplink,tl-wr1043nd-v4|\
tplink,tl-wr1043n-v5)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"

6
target/linux/ath79/base-files/etc/board.d/02_network
View File

@@ -96,7 +96,8 @@ ath79_setup_interfaces()
dlink,dir-859-a1|\
engenius,epg5000|\
tplink,archer-c2-v3|\
tplink,tl-wr1043nd-v4)
tplink,tl-wr1043nd-v4|\
tplink,tl-wr1043n-v5)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
@@ -343,7 +344,8 @@ ath79_setup_macs()
base_mac=$(mtd_get_mac_binary config 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
tplink,tl-wr1043nd-v4)
tplink,tl-wr1043nd-v4|\
tplink,tl-wr1043n-v5)
base_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;