SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ipq40xx: add support for MikroTik SXTsq 5 ac

Browse Source 
This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD),
an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet
port.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 256 MB
 - Storage: 16 MB NOR
 - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae
 - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in
 - 1x Ethernet LED (green)
 - 7x user-controllable LEDs
  · 1x power (blue)
  · 1x user (green)
  · 5x rssi (green)

Note:
 Serial UART is probably available on the board, but it has not been
 tested.

Flashing:
 Boot via TFTP the initramfs image. Then, upload a sysupgrade image
 via SSH and flash it normally. More info at the "Common procedures
 for MikroTik products" page https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
This commit is contained in:
Roger Pueyo Centelles
2020-10-23 16:05:28 +02:00
committed by Paul Spooren
parent 43dad22025
commit d1f1e5269e
9 changed files with 271 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ipq40xx/base-files/etc/board.d/01_leds
View File

@@ -45,6 +45,14 @@ engenius,ens620ext)
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
mikrotik,sxtsq-5-ac)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
;;
mobipromo,cm520-79f)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"

5
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@@ -28,6 +28,7 @@ ipq40xx_setup_interfaces()
engenius,eap1300|\
engenius,emd1|\
meraki,mr33|\
mikrotik,sxtsq-5-ac|\
netgear,ex6100v2|\
netgear,ex6150v2|\
zyxel,wre6606)
@@ -175,6 +176,10 @@ ipq40xx_setup_macs()
lan_mac=$(macaddr_add $wan_mac 1)
label_mac="$wan_mac"
;;
mikrotik,sxtsq-5-ac)
lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
label_mac="$lan_mac"
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac