SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

bmips: add support for Comtrend WAP-5813n

Browse Source 
The Comtrend WAP-5813n is a wifi gigabit router, 2.4 GHz single band with
two external antennas.

Hardware:
 - SoC: Broadcom BCM6369
 - CPU: dual core BMIPS4350 @ 400Mhz
 - RAM: 64 MB DDR
 - Flash: 8 MB parallel NOR
 - LAN switch: Broadcom BCM53115, 5x 1Gbit
 - Wifi 2.4 GHz: miniPCI Broadcom BCM4322 802.11bgn
 - USB: 1x 2.0 (optional)
 - Buttons: 3x (reset)
 - LEDs: yes
 - UART: yes

Installation via CFE web UI:
  1. Power off the router.
  2. Press reset button near the power switch.
  3. Keep it pressed while powering up during ~20+ seconds.
  4. Browse to http://192.168.1.1 and upload the firmware.
  5. Wait a few minutes for it to finish.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry picked from commit c3b1ef2dfd)
This commit is contained in:
Álvaro Fernández Rojas
2023-06-11 12:30:57 +02:00
parent 8b20b8fe2a
commit cfdcf4b4d9
5 changed files with 249 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/bmips/bcm6368/base-files/etc/board.d/01_leds
View File

@@ -6,6 +6,9 @@
board_config_update
case "$(board_name)" in
comtrend,wap-5813n)
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
;;
netgear,dgnd3700-v1 |\
netgear,dgnd3800b)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "switch.1"

1
target/linux/bmips/bcm6368/base-files/etc/board.d/02_network
View File

@@ -14,6 +14,7 @@ comtrend,vr-3025un)
ucidef_set_bridge_device switch
ucidef_set_interface_lan "lan1 lan2 lan3 iptv"
;;
comtrend,wap-5813n |\
netgear,dgnd3700-v1 |\
netgear,dgnd3800b |\
netgear,evg2000)

1
target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
View File

@@ -5,6 +5,7 @@
case "$(board_name)" in
comtrend,vr-3025u |\
comtrend,vr-3025un |\
comtrend,wap-5813n |\
netgear,evg2000 |\
observa,vh4032n)
mtd fixtrx firmware