SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for TP-Link TL-WR941HP v1

Browse Source 
Specifications:
    SOC:        Qualcomm Atheros TP9343 (750 MHz)
    Flash:      8 Mb (GigaDevice GD25Q64CSIG)
    RAM:        64 Mb (Zentel A3R12E40DBF-8E)
    Serial:     yes, 4-pin header
    Wlan:       Qualcomm Atheros TP9343, antenna: MIM0 3x3:3 RP-SMA
                3 x 2.4GHz power amp module Skyworks (SiGe) SE2576L
    Ethernet:   Qualcomm Atheros TP9343
    Lan speed:  100M ports: 4
    Lan speed:  100M ports: 1
    Other info: same case, ram and flash that TP-Link TL-WR841HP,
                different SOC

    https://forum.openwrt.org/t/adding-device-support-tp-link-wr941hp/

Label MAC addresses based on vendor firmware:
    LAN   *:ee  label
    WAN   *:ef  label +1
    WLAN  *:ee  label

    The label MAC address found in "config" partition at 0x8

Flash instruction:
    Upload the generated factory firmware on web interface.

Signed-off-by: Diogenes Rengo <rengocbx250@gmail.com>
[remove various whitespace issues, squash commits, use short 0x0]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Diogenes Rengo
2021-06-25 11:44:40 -03:00
committed by Adrian Schmutzler
parent 12eb5b2384
commit cce2e8db56
5 changed files with 201 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -374,6 +374,10 @@ tplink,tl-wr842n-v2)
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
;;
tplink,tl-wr941hp-v1)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1" "link tx rx"
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
;;
trendnet,tew-823dru)
ucidef_set_led_netdev "wan" "WAN" "green:planet" "eth0"
;;

3
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -398,7 +398,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
tplink,tl-wr842n-v2)
tplink,tl-wr842n-v2)\
tplink,tl-wr941hp-v1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"