ar71xx: create wndr3700 network config from uci-defaults

Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373

target/linux/ar71xx/base-files/etc/uci-defaults/02_network

@@ -321,6 +321,46 @@ ew-dorin-router)
 	ucidef_add_switch_vlan "switch0" "1" "0 2 3"
 	;;
 
+wndr3700)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	uci set network.@switch[-1].blinkrate='2'
+
+	ucidef_add_switch_port "switch0" "1"
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+	uci set network.@switch_port[-1].led='6'
+
+	ucidef_add_switch_port "switch0" "2"
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	uci set network.@switch_port[-1].led='9'
+
+	ucidef_add_switch_port "switch0" "5"
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	uci set network.@switch_port[-1].led='2'
+	;;
+
 *)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	;;