SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

kirkwood: add support for Cisco ON100

Browse Source 
The Cisco ON100 device is a Kirkwood based router:

    SoC: Marvell 88F6282 1600Mhz
    SDRAM memory: 512MB DDR3 1333Mhz
    Gigabit ethernet: 2x Marvell 88E1310 (over RGMII)
    Flash memory: 512MB
    2 bi-colour status LEDs (green/red)
    1 Reset button
    1 USB 2.0 port (on back)
    1 SDIO slot (on back)

This commit adds a target profile of "Cisco Systems ON100" under the target
system "Marvell Kirkwood".

Flashing can be performed over tftp, once "dhcp" has been issued:
 tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin
 nand erase 0x0c0000 ${filesize}
 nand write ${loadaddr} 0x0c0000 ${filesize}

Once flashed, set environment variables to boot:
 setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs
  \; bootm
 saveenv

Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
This commit is contained in:
Makoto Takeuchi
2017-05-24 16:37:24 +01:00
committed by Mathias Kresin
parent c2f052acae
commit ca27b3d370
5 changed files with 195 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/kirkwood/base-files/etc/board.d/02_network
View File

@@ -35,6 +35,9 @@ case "$board" in
ucidef_set_interface_lan "eth0" "dhcp"
ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr )
;;
"on100")
ucidef_set_interface_lan "eth0 eth1"
;;
*)
ucidef_set_interface_lan "eth0"
;;

3
target/linux/kirkwood/base-files/etc/diag.sh
View File

@@ -23,6 +23,9 @@ get_status_led() {
nsa310b)
status_led="nsa310:green:sys"
;;
on100)
status_led="on100:green:health"
;;
esac
}