SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for D-Link DWR-960

Browse Source 
The DWR-960 Wireless Router is based on the MT7620A SoC.

Specification:

- MediaTek MT7620A (580 Mhz)
- 128 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610 mpcie card)
- 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN)
- 1x 10/100/1000 Mbps Ethernet (1 LAN) (AR8035)
- 2x internal, non-detachable antennas (Wifi 2.4G)
- 3x external, detachable antennas (2x LTE, 1x Wifi 5G)
- 1x LTE modem
- UART (J4) header on PCB (57600 8n1)
- 9x LED, 2x button
- JBOOT bootloader

Known issues:
- Flash is extremely slow.

Installation:
Apply factory image via http web-gui or JBOOT recovery page

How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
  blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Pawel Dembicki
2018-04-19 09:20:58 +02:00
committed by Daniel Golle
parent 5a5a9b7a75
commit c948a4782b
6 changed files with 216 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
View File

@@ -87,6 +87,9 @@ dlink,dwr-922-e2)
ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
;;
dlink,dwr-960)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x2e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
dovado,tiny-ac)
set_wifi_led "$boardname:orange:wifi"
;;

5
target/linux/ramips/mt7620/base-files/etc/board.d/02_network
View File

@@ -100,6 +100,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0"
;;
dlink,dwr-960)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0"
;;
edimax,br-6478ac-v2|\
tplink,archer-c2-v1)
ucidef_add_switch "switch1" \
@@ -273,6 +277,7 @@ ramips_setup_macs()
dlink,dwr-118-a2|\
dlink,dwr-921-c1|\
dlink,dwr-922-e2|\
dlink,dwr-960|\
lava,lr-25g001)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
lan_mac=$(macaddr_add "$wan_mac" 1)

3
target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches
View File

@@ -11,6 +11,9 @@ dlink,dir-510l)
ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0"
ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1"
;;
dlink,dwr-960)
ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "0" "1"
;;
head-weblink,hdrm200)
ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0"
ucidef_add_gpio_switch "io1" "I/O 1" "1"

1
target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
View File

@@ -28,6 +28,7 @@ case "$FIRMWARE" in
dlink,dwr-118-a2|\
dlink,dwr-921-c1|\
dlink,dwr-922-e2|\
dlink,dwr-960|\
lava,lr-25g001)
wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
wifi_mac=$(macaddr_add "$wan_mac" 1)