SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for NEC Aterm WG800HP

Browse Source 
NEC Aterm WG800HP is a 2.4/5 GHz band 11ac router, based on Qualcomm
Atheros QCA9563.

Specification:

- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2.4/5 GHz wifi
  - 2.4 GHz: 2T2R (SoC internal)
  - 5 GHz: 1T1R (QCA9887)
- 4x 10/100/1000 Mbps Ethernet
- 8x LEDs, 3x keys (2x buttons, 1x slide-switch)
- UART through-hole on PCB (J2)
  - Vcc, GND, NC, TX, RX from SoC side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port on WG800HP
2. Connect power cable to WG800HP and turn on it
3. Access to "http://192.168.10.1/" and open firmware update page
("ファームウェア更新")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
This commit is contained in:
INAGAKI Hiroshi
2018-12-08 15:18:17 +09:00
committed by Christian Lamparter
parent 99df98442e
commit c566439c9b
5 changed files with 227 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ath79/base-files/etc/board.d/02_network
View File

@@ -89,6 +89,10 @@ ath79_setup_interfaces()
glinet,gl-x750)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
nec,wg800hp)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
@@ -238,6 +242,10 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
;;
nec,wg800hp)
lan_mac=$(mtd_get_mac_text board_data 640)
wan_mac=$(mtd_get_mac_text board_data 1152)
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)

4
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@@ -111,6 +111,10 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
;;
nec,wg800hp)
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_text board_data 1664) 2
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;

4
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -96,6 +96,10 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
nec,wg800hp)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 2176)
;;
ocedo,koala)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 12)