SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ipq806x: drop ipq40xx support

Browse Source 
Signed-off-by: John Crispin <john@phrozen.org>
This commit is contained in:
John Crispin
2018-02-21 16:17:10 +01:00
committed by Mathias Kresin
parent 20d63ebc94
commit b7f115f22a
48 changed files with 3 additions and 15076 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ipq806x/base-files/etc/board.d/01_leds
View File

@@ -11,14 +11,6 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
avm,fritzbox-4040)
ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
;;
glinet,gl-b1300)
ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:green:wlan" "phy0tpt"
;;
netgear,d7800 |\
netgear,r7500 |\
netgear,r7500v2 |\

9
target/linux/ipq806x/base-files/etc/board.d/02_network
View File

@@ -12,11 +12,6 @@ board_config_update
board=$(board_name)
case "$board" in
avm,fritzbox-4040)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
linksys,ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ucidef_add_switch "switch0" \
@@ -33,10 +28,6 @@ tplink,vr2600v)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
;;
glinet,gl-b1300 |\
openmesh,a42)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
qcom,ipq8064-db149)
ucidef_set_interface_lan "eth1 eth2 eth3"
ucidef_add_switch "switch0" \

29
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -45,35 +45,6 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
openmesh,a42)
ath10kcal_extract "0:ART" 4096 12064
;;
glinet,gl-b1300 |\
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 4096 12064
;;
esac
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
openmesh,a42)
ath10kcal_extract "0:ART" 20480 12064
;;
glinet,gl-b1300 |\
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 20480 12064
;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
linksys,ea8500)