ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)

This patch adds support for the MikroTik RouterBOARD RB493G, ported
from the ar71xx target.

See https://routerboard.com/RB493G for details

Specification:
- SoC Qualcomm Atheros AR7161
- RAM: 256 MiB
- Storage: 128MiB NAND
- Ethernet: 9x 1000/100/10 Mbps
- USB 1x 2.0 / 1.0 type A
- PCIe: 3x Mini slot
- MicroSD slot

Working:
- Board/system detection
- Ethernet
- SPI
- NAND
- LEDs
- USB
- Sysupgrade

Enabled (but untested due to lack of hardware):
- PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed

Installation methods:
- tftp boot initramfs image, scp then flash via "sysupgrade -n"
- nand boot existing OpenWrt, scp then flash via "sysupgrade -n"

Notes:
- initramfs image will not work if uncompressed image size over ~8.5Mb
- The "rb4xx" drivers have been enabled

Signed-off-by: Christopher Hill <ch6574@gmail.com>

target/linux/ath79/mikrotik/base-files/etc/board.d/02_network

@@ -8,6 +8,13 @@ ath79_setup_interfaces()
 	local board="$1"
 
 	case "$board" in
+	mikrotik,routerboard-493g)
+		ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth0.2"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
+		ucidef_add_switch "switch1" \
+			"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+		;;
 	mikrotik,routerboard-922uags-5hpacd|\
 	mikrotik,routerboard-wap-g-5hact2hnd)
 		ucidef_set_interface_lan "eth0"

target/linux/ath79/mikrotik/base-files/lib/upgrade/platform.sh

@@ -31,6 +31,7 @@ platform_do_upgrade() {
 	local board=$(board_name)
 
 	case "$board" in
+	mikrotik,routerboard-493g|\
 	mikrotik,routerboard-922uags-5hpacd)
 		platform_do_upgrade_mikrotik_nand "$1"
 		;;