SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ar71xx: add support for Fritz!Box 4020

Browse Source 
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.

SoC:   Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM:   Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi:  QCA9561 b/g/n 3x3 450Mbit/s
USB:   1x USB 2.0
IN:    WPS button, WiFi button
OUT:   Power LED green, Internet LED green, WLAN LED green,
       LAN LED green, INFO LED green, INFO LED red
UART:  Header Next to Black metal shield
       Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
       The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (LAN + WAN)
 - WiFi (correct MAC)
 - Installation via EVA bootloader
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Not working:
 - USB port

Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
like following:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put openwrt-sysupgrade.bin mtd1

Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.

Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
2018-04-24 19:52:13 +02:00
committed by John Crispin
parent 66c8afd115
commit b6a4c67468
14 changed files with 300 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
View File

@@ -18,6 +18,7 @@ struct platform_device;
extern unsigned char ath79_mac_base[] __initdata;
void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
void ath79_extract_mac_reverse(u8 *ptr, u8 *out);
void ath79_init_mac(unsigned char *dst, const unsigned char *src,
int offset);
void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);