SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for TP-Link MR6400 v5

Browse Source 
TL-MR6400v5 is very similar to TL-MR6400v4. Main differences are:
  - smaller form factor
  - different LED GPIOs
  - different switch connections

You can flash via tftp recovery:
 - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24
 - connect to any ethernet port
 - power on the device while holding the reset button
 - wait at least 8 seconds before releasing reset button

Flashing via OEM web interface does not work.

LTE module does not support DHCP so it must be configured via QMI.

Hardware Specification (v5.0 EU):
 - SoC: MT7628NN
 - Flash: Winbond W25Q64JVS (8MiB)
 - RAM: ESMT M14D5121632A (64MiB)
 - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
 - Ethernet: 1NIC (4x100M)
 - WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
 - Power: DC 9V 0.85A

Signed-off-by: Filip Moc <lede@moc6.cz>
This commit is contained in:
Filip Moc
2020-11-24 22:15:26 +01:00
committed by Adrian Schmutzler
parent b31aaa0580
commit b641eb6ecf
4 changed files with 123 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
View File

@@ -79,6 +79,10 @@ tplink,tl-mr6400-v4)
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x0e"
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x10"
;;
tplink,tl-mr6400-v5)
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x07"
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x08"
;;
tplink,tl-wr841n-v13)
ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan" "phy0tpt"
ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x2"

4
target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
View File

@@ -116,6 +116,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
tplink,tl-mr6400-v5)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:wan" "6@eth0"
;;
tplink,tl-wr902ac-v3)
ucidef_add_switch "switch0" \
"4:lan" "6@eth0"