SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

kirkwood: add support for two clones from Endian

Browse Source 
They are Endian 4i Edge 200 and his clone Endian UTM Mini.

Hardware:
  - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
  - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
  - NAND Flash: 512MB (Micron 29F4G08AAC)
  - Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
  - Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
  - Storage: MicroSD Slot
  - WLAN: MiniPCIe Slot present, and fitted with SparkLan WPEA-110N/E
          (Atheros AR9280 chipset) (ONLY Endian UTM Mini WLAN)
  - USB: 1x USB 2.0 port
  - Console: RJ-45 port
  - LEDs: 3x GPIO controlled

Notes:
  - WLAN led (Endian UTM Mini) is drived by MPCIE card

Installation by TFTP + serial:
  - Setup TFTP server and copy initramfs image
  - Connect serial console
  - Stop booting in u-boot
  - Do:
	setenv bootargs 'console=ttyS0,115200n8 earlyprintk'
	saveenv
	setenv serverip 192.168.1.1
	setenv ipaddr 192.168.1.2
	tftpboot 0x1200000 openwrt-kirkwood-endian_4i-edge-200-initramfs-uImage
	bootm 0x1200000
  - copy sysupgrade image via ssh.
  - run sysupgrade

Installation by USB + serial:
  - Copy initramfs image to fat32 usb drive
  - Connect pendrive to USB 2.0 front socket
  - Connect serial console
  - Stop booting in u-boot
  - Do:
	setenv bootargs 'console=ttyS0,115200n8 earlyprintk'
        saveenv
	usb reset
	fatload usb 0:1 0x1200000 openwrt-kirkwood-endian_4i-edge-200-initramfs-uImage
	bootm 0x1200000
  - copy sysupgrade image via ssh.
  - run sysupgrade

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Pawel Dembicki
2021-07-21 14:24:52 +02:00
committed by Christian Lamparter
parent 4e46ae1f69
commit afd7ec3b57
4 changed files with 241 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/kirkwood/base-files/etc/board.d/02_network
View File

@@ -31,6 +31,9 @@ seagate,goflexnet|\
zyxel,nsa310s)
ucidef_set_interface_lan "eth0" "dhcp"
;;
endian,4i-edge-200)
ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
;;
linksys,e4200-v2|\
linksys,ea3500|\
linksys,ea4500)