SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for ipTIME T5004

Browse Source 
ipTIME T5004 is a 5-port Gigabit Ethernet router, based on MediaTek MT7621A.

Specifications:
* SoC: MT7621AT
* RAM: 128 MiB
* Flash: NAND 128 MiB
* Ethernet: 5x 1GbE
  * Switch: SoC built-in
* UART: J4 (57600 baud)
  * Pinout: [3V3] (TXD) (RXD) (GND)

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware via recovery mode:
1.  Press reset button, power up the device, wait >15s for CPU LED
    to stop blinking.
2.  Upload stock image to TFTP server at 192.168.0.1.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Sungbo Eo
2021-08-02 00:43:34 +09:00
parent 4b587f2561
commit a1deab0ec9
4 changed files with 141 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
View File

@@ -135,6 +135,10 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
label_mac=$wan_mac
;;
iptime,t5004)
lan_mac=$(mtd_get_mac_ascii config ethaddr)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
jcg,y2|\
wavlink,wl-wn531a6|\
winstars,ws-wn583a6|\