2
0
forked from Ivasoft/openwrt

ath79: add support for Ubiquiti PowerBeam 5AC 500

The Ubiquiti PowerBeam 5AC 500 (PBE-5AC-500) is an outdoor 802.11ac
5 GHz bridge with a radio feed and a dish antenna.

Specifications:
 - SoC: Qualcomm Atheros QCA9558
 - RAM: 128 MB DDR2
 - Flash: 16 MB SPI NOR (mx25l12805d)
 - Ethernet: 1x 10/100/1000 Mbps Atheros 8031, 24 Vdc PoE-in
 - WiFi 5 GHz: QCA988x HW2.0 Ubiquiti target 0x4100016c chip_id 0x043222ff
 - Buttons: 1x (reset)
 - LEDs: 1x power, 1x Ethernet, 4x RSSI, all blue
 - UART: not tested

Not supported:
 - RSSI LEDs (probably through 74HC595 chip)

Installation from stock airOS firmware:
 - Follow instructions for XC-type Ubiquiti devices on OpenWrt wiki at
   https://openwrt.org/toh/ubiquiti/common

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
This commit is contained in:
Roger Pueyo Centelles
2020-04-24 02:22:44 +02:00
committed by Adrian Schmutzler
parent 0486641849
commit a0ef42e77c
5 changed files with 127 additions and 0 deletions

View File

@@ -53,6 +53,7 @@ ath79_setup_interfaces()
ubnt,nanostation-loco-m|\
ubnt,nanostation-loco-m-xw|\
ubnt,picostation-m|\
ubnt,powerbeam-5ac-500|\
ubnt,powerbeam-5ac-gen2|\
ubnt,rocket-m|\
ubnt,unifiac-lite|\
@@ -471,6 +472,7 @@ ath79_setup_macs()
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
;;
ubnt,litebeam-ac-gen2|\
ubnt,powerbeam-5ac-500|\
ubnt,powerbeam-5ac-gen2)
label_mac=$(mtd_get_mac_binary art 0x5006)
;;