2
0
forked from Ivasoft/openwrt

ath79: add support for Compex WPJ344

Specifications:

SoC: AR9344
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
2 Gigabit ethernet ports
2×2 2.4GHz on-board radio
miniPCIe slot that supports 5GHz radio
PoE 48V IEEE 802.3af/at - 24V passive optional
USB 2.0 header

Installation:

To install, either start tftp in bin/targets/ath79/generic/ and use
the u-boot prompt over UART:

tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
boot

The cpximg file can be used with sysupgrade in the stock firmware (add
SSH key in luci for root access) or with the built-in cpximg loader.
The cpximg loader can be started either by holding the reset button
during power up or by entering the u-boot prompt and entering 'cpximg'.
Once it's running, a TFTP-server under 192.168.1.1 will accept the image
appropriate for the board revision that is etched on the board.

For example, if the board is labelled '6A08':

tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bin

MAC addresses:

<&uboot 0x2e010>  *:99  (label)
<&uboot 0x2e018>  *:9a
<&uboot 0x2e020>  *:9b
<&uboot 0x2e028>  *:9c

Only the first two are used (for ethernet), the WiFi modules have
separate (valid) addresses. The latter two addresses are not used.

Signed-off-by: Leon M. George <leon@georgemail.eu>
[minor commit message adjustments, drop gpio in DTS, DTS style fixes,
sorting, drop unused cpximg recipe]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Leon M. George
2019-07-26 20:32:55 +02:00
committed by Adrian Schmutzler
parent f09b9319c6
commit a0bb356612
4 changed files with 180 additions and 0 deletions

View File

@@ -115,6 +115,13 @@ engenius,ecb1750|\
enterasys,ws-ap3705i)
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
;;
compex,wpj344-16m)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "sig1" "SIG1" "wpj344:red:sig1" "wlan0" "85" "100"
ucidef_set_led_rssi "sig2" "SIG2" "wpj344:yellow:sig2" "wlan0" "75" "100"
ucidef_set_led_rssi "sig3" "SIG3" "wpj344:green:sig3" "wlan0" "65" "100"
ucidef_set_led_rssi "sig4" "SIG4" "wpj344:green:sig4" "wlan0" "50" "100"
;;
compex,wpj531-16m)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "sig1" "SIG1" "wpj531:red:sig1" "wlan0" "85" "100"

View File

@@ -131,6 +131,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
compex,wpj344-16m)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan"
;;
devolo,dvl1200e|\
devolo,dvl1750e|\
ocedo,ursus)
@@ -366,6 +370,9 @@ ath79_setup_macs()
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
;;
compex,wpj344-16m)
wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
;;
devolo,magic-2-wifi)
label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
;;