ar71xx: add support for MikroTik hAP ac

This patch adds initial support for the MikroTik RouterBOARD hAP ac
(RB962UiGS-5HacT2HnT).

All functions are supported except:
-SFP cage (eth1) is not working
-WLAN LEDs are not working

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -249,6 +249,9 @@ rb-952ui-5ac2nd)
 	ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
 	ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt"
 	;;
+rb-962uigs-5hact2hnt)
+	ucidef_set_led_timer "user" "USER/SFP" "rb:green:user" "1000" "1000"
+	;;
 rb-2011l|\
 rb-2011uas|\
 rb-2011uias|\

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -171,6 +171,7 @@ ar71xx_setup_interfaces()
 	rb-750gl|\
 	rb-751g|\
 	rb-951g-2hnd|\
+	rb-962uigs-5hact2hnt|\
 	wlr8100|\
 	wzr-hp-g450h)
 		ucidef_add_switch "switch0" \

target/linux/ar71xx/base-files/etc/diag.sh

@@ -307,6 +307,7 @@ get_status_led() {
 	rb-941-2nd|\
 	rb-951ui-2nd|\
 	rb-952ui-5ac2nd|\
+	rb-962uigs-5hact2hnt|\
 	rb-lhg-5nd|\
 	rb-mapl-2nd)
 		status_led="rb:green:user"

target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -127,7 +127,8 @@ case "$FIRMWARE" in
 		ath10kcal_extract "ART" 20480 2116
 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
 		;;
-	rb-911g-5hpacd)
+	rb-911g-5hpacd | \
+	rb-962uigs-5hact2hnt)
 		ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116
 		;;
 	esac