SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

kirkwood: add support for ipTIME NAS1

Browse Source 
ipTIME NAS1 is a 1-bay NAS, based on Marvell Kirkwood SoC.

Specifications:
* SoC: 88F6281
* RAM: 256 MiB
* Flash: SPI NOR 16 MiB
* SATA: 1x 3Gb/s
* Ethernet: 1x 1GbE
* USB: 1x 2.0
* Fan: 2 speed level
* UART: JP1 (115200 8N1)
  * Pinout: [3V3] (TXD) (RXD) (GND)

Notes:
* There are several variants of the model name: "NAS-I", "NASI", "NAS1".
  Here "NAS1" is adopted for consistent naming scheme.
* The reset button is also a USB copy button in stock FW,
  but in this patch the former is the only default behavior.

Installation via web interface:
1.  Flash sysupgrade image through the stock web interface.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
Sungbo Eo
2022-01-01 21:00:36 +09:00
parent 0c568d044f
commit 957f9adeb1
7 changed files with 270 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
target/linux/kirkwood/base-files/etc/board.d/02_network
View File

@@ -22,6 +22,7 @@ kirkwood_setup_interfaces()
globalscale,sheevaplug|\
iom,iconnect-1.1|\
iom,ix2-200|\
iptime,nas1|\
netgear,readynas-duo-v2|\
raidsonic,ib-nas62x0|\
seagate,blackarmor-nas220|\
@@ -55,6 +56,10 @@ kirkwood_setup_macs()
local label_mac=""
case "$board" in
iptime,nas1)
lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
label_mac=$lan_mac
;;
linksys,e4200-v2|\
linksys,ea3500|\
linksys,ea4500)