SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

mvebu: cortexa9: Add support for Ctera C200-V2

Browse Source 
2-Bay NAS - maximum two 3.5" Harddisks

Hardware:
  - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
  - Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
  - NAND Flash: 256MB (ESMT F59L2G81A-25T)
  - Lan: 1x GBE (Marvell 88E1318-NNB2)
  - Storage: 2x SATA HDD 3.5" Slot
  - USB: 2x USB 3.0 port (Renesas uPD720202)
  - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
  - LEDs: 13x GPIO controlled
  - Buttons: 2x GPIO controlled

Known issues:
  - Buzzer is unused due lack of proper driver
  - USB1/2 usbport ledtrigger won't work (through DT)
  - Renesas uPD720202 requires firmware file. It's possible to find
    non-free binary. Please look for 'UPDATE.mem' file and put in into
    '/lib/firmware/renesas_usb_fw.mem' file.

Installation:
  - Apply factory initramfs image via stock web-gui.
  - Do sysupgrade to make installation complete.

Back to stock:
  - OpenWrt rootfs partition use unused space after stock firmware.
  - Full revert is possible.
  - Login via ssh and run:

 ## ctera_c200-v2_back_to_factory start ##
 . /lib/functions.sh
 part=$(find_mtd_part "active_bank")
 active_bank=$(strings "$part" | grep bank)
 if [ "$active_bank" = "bank1" ]; then
 	echo "bank2" > /tmp/change_bank
 else
 	echo "bank1" > /tmp/change_bank
 fi
 mtd write /tmp/change_bank active_bank
 reboot
 ## ctera_c200-v2_back_to_factory end ##

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(put back-to-stock script into commit message, removed dup. SUBPAGESIZE var,
added 01_leds for non-working dt-usb-port trigger)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Pawel Dembicki
2021-12-11 23:23:22 +01:00
committed by Christian Lamparter
parent 1ed50b92d1
commit 9149ed4f05
8 changed files with 529 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
View File

@@ -11,6 +11,10 @@ board=$(board_name)
boardname="${board##*,}"
case "$board" in
ctera,c200-v2
ucidef_set_led_usbport "usb2" "USB2" "green:usb-2" "usb1-port1" "usb2-port1"
ucidef_set_led_usbport "usb3" "USB3" "green:usb-1" "usb1-port2" "usb2-port2"
;;
kobol,helios4)
ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1"
;;

7
target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network
View File

@@ -12,6 +12,9 @@ mvebu_setup_interfaces()
local board="$1"
case "$board" in
ctera,c200-v2)
ucidef_set_interface_lan "eth0" "dhcp"
;;
cznic,turris-omnia)
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" "eth2"
;;
@@ -58,6 +61,10 @@ mvebu_setup_macs()
buffalo,ls421de)
lan_mac=$(mtd_get_mac_ascii u-boot-env eth1addr)
;;
ctera,c200-v2)
label_mac=$(mtd_get_mac_ascii dev_params mac)
lan_mac=$label_mac
;;
linksys,wrt1200ac|\
linksys,wrt1900ac-v2|\
linksys,wrt1900acs|\