SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ar71xx: add support for GainStrong Oolite V5.2

Browse Source 
GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on
module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are
available on castellated pins.

Specification:

- 650/400/200 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 5x 10/100 Mbps Ethernet (all ports available on castellated pins)
- 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA
- 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11)
- 3x U.FL
- 1x USB 2.0

The dedicated development board includes 5 FE ports, USB 2.0 port, two
buttons (one directly connected to SOC reset input), header with all
GPIOs and several LEDs.

Flash instruction:

Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to
flash OpenWrt firmware.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
2018-02-15 23:15:53 +01:00
parent 907d674910
commit 8c64824576
13 changed files with 160 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View File

@@ -890,6 +890,17 @@ config ATH79_MACH_GS_OOLITE_V1
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_GS_OOLITE_V5_2
bool "GainStrong Oolite V5.2 support"
select SOC_QCA953X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_HIVEAP_121
bool "Aerohive HiveAP-121 support"
select SOC_AR934X