SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for TP-Link TL-WPA8630 v1

Browse Source 
This ports the TP-Link TL-WPA8630 v1 from ar71xx to ath79.

Specifications:

SoC: QCA9563
CPU: 750 MHz
Flash/RAM: 8 / 128 MiB
Ethernet: 3x 1G ports (QCA8337 switch)
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac (ath10k)

Buttons, LEDs and network setup appear to be almost identical
to the v2 revision.

Powerline interface is connected to switch port 5 (Label LAN4).

Installation:

No "fresh" device was available for testing the factory image.

It is not known whether flashing via OEM firmware GUI is possible
or not. A discussion from 2018 [1] about that indicates a few
adjustments are necessary, but it is not clear whether those
are already implemented with the TPLINK_HEADER_VERSION = 2 or not.

Note that for the TL-WPA8630P v1, the TPLINK_HWID needs to be
changed to 0x86310001 to allow factory flashing.

[1] https://forum.openwrt.org/t/solved-tl-wpa8630p-lede-does-not-install/8161/27

Recovery:

Recovery is only possible via serial.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler
2020-07-09 12:49:17 +02:00
parent 488da882f5
commit 7ef7dbaf70
8 changed files with 226 additions and 131 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -297,6 +297,7 @@ tplink,tl-mr6400-v1)
ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
;;
tplink,tl-wpa8630-v1|\
tplink,tl-wpa8630p-v2-eu|\
tplink,tl-wpa8630p-v2-int)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3c"

1
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -294,6 +294,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
;;
tplink,tl-wpa8630-v1|\
tplink,tl-wpa8630p-v2-eu|\
tplink,tl-wpa8630p-v2-int)
# port 5 (internal) is the power-line port

4
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -129,6 +129,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
;;
tplink,tl-wpa8630-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1)
;;
tplink,tl-wr902ac-v1)
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)

4
target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
View File

@@ -45,6 +45,10 @@ tplink,re355-v1)
tplink,re450-v1)
migrate_leds "re450:=tp-link:"
;;
tplink,tl-wpa8630-v1)
migrate_leds "^tl-wpa8630:=tp-link:" \
':wlan$=:wifi2g' ':wlan5$=:wifi5g'
;;
wd,mynet-n750)
migrate_leds "wd:=mynet-n750:"
;;