forked from Ivasoft/openwrt
at91: kernel: bump to 5.10
Bump at91 targets to kernel v5.10. With this patches and files for wb45n and wb50n were removed as they are now included in upstream kernel. Along with: - this the kernel config for sama5d2 and sam9x targets has been refreshed (with make kernel_menuconfig + save); - CONFIG_ARCH_AT91 and specific sam9x SoCs (AT91RM9200, AT91SAM9, SAM9X60) has been enabled such that sam9x SoCs to be able to boot. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
This commit is contained in:
Claudiu Beznea
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
05a7af9ca0
commit
7bd0fba3df
@@ -1,220 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* wb45n.dts - Device Tree file for WB45NBT board
|
||||
*
|
||||
* Copyright (C) 2015 Laird
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "at91sam9g25.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
|
||||
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
main_clock: clock@0 {
|
||||
compatible = "atmel,osc", "fixed-clock";
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
|
||||
rstc@fffffe00 {
|
||||
compatible = "atmel,sama5d3-rstc";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
nand {
|
||||
pinctrl_nand: nand-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */
|
||||
AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */
|
||||
AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */
|
||||
AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */
|
||||
AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */
|
||||
AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD5 gpio RDY/BUSY pin pull_up */
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
pinctrl_board_usb2: usb2-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart3: serial@f8028000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi0: spi@f0000000 {
|
||||
status = "okay";
|
||||
cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
|
||||
};
|
||||
|
||||
mmc0: mmc@f0008000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: gadget@f803c000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_board_usb2>;
|
||||
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f8014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
shdwc@fffffe10 {
|
||||
atmel,wakeup-mode = "low";
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@00600000 {
|
||||
status = "okay";
|
||||
num-ports = <2>;
|
||||
atmel,vbus-gpio = <
|
||||
&pioB 12 GPIO_ACTIVE_HIGH
|
||||
&pioA 31 GPIO_ACTIVE_HIGH
|
||||
>;
|
||||
atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb1: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc; /* Enable PMECC */
|
||||
atmel,pmecc-cap = <4>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bs";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "redund-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
kernel-a@e0000 {
|
||||
label = "kernel-a";
|
||||
reg = <0xe0000 0x280000>;
|
||||
};
|
||||
|
||||
kernel-b@360000 {
|
||||
label = "kernel-b";
|
||||
reg = <0x360000 0x280000>;
|
||||
};
|
||||
|
||||
rootfs-a@5e0000 {
|
||||
label = "rootfs-a";
|
||||
reg = <0x5e0000 0x2600000>;
|
||||
};
|
||||
|
||||
rootfs-b@2be0000 {
|
||||
label = "rootfs-b";
|
||||
reg = <0x2be0000 0x2600000>;
|
||||
};
|
||||
|
||||
user@51e0000 {
|
||||
label = "user";
|
||||
reg = <0x51e0000 0x2dc0000>;
|
||||
};
|
||||
|
||||
logs@7fa0000 {
|
||||
label = "logs";
|
||||
reg = <0x7fa0000 0x60000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
atheros {
|
||||
compatible = "atheros,ath6kl";
|
||||
atheros,board-id = "SD32";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
irqbtn@pb18 {
|
||||
label = "IRQBTN";
|
||||
linux,code = <99>;
|
||||
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1,113 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* wb50n.dts - Device Tree file for wb50n board
|
||||
*
|
||||
* Copyright (C) 2015 Laird
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "wb50n.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
|
||||
compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M";
|
||||
};
|
||||
|
||||
ahb {
|
||||
|
||||
apb {
|
||||
mmc0: mmc@f0000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART1 */
|
||||
usart0: serial@f001c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART0 */
|
||||
usart1: serial@f0020000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi1: spi@f8008000 {
|
||||
status = "okay";
|
||||
|
||||
spidev@0 {
|
||||
compatible = "spidev";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <8000000>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: gadget@00500000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: ohci@00600000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
btn0@pa10 {
|
||||
label = "BTNESC";
|
||||
linux,code = <1>; /* ESC button */
|
||||
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
|
||||
irqbtn@pe31 {
|
||||
label = "IRQBTN";
|
||||
linux,code = <99>; /* SysReq button */
|
||||
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
label = "wb50n:blue:led0";
|
||||
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "wb50n:green:led1";
|
||||
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "wb50n:red:led2";
|
||||
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1,205 +0,0 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* wb50n.dts - Device Tree file for wb50n board
|
||||
*
|
||||
* Copyright (C) 2015 Laird
|
||||
*/
|
||||
|
||||
#include "sama5d31.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
|
||||
compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
|
||||
apb {
|
||||
pmc: pmc@fffffc00 {
|
||||
main: mainck {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
periphck {
|
||||
usart1_clk: usart1_clk {
|
||||
#clock-cells = <0>;
|
||||
reg = <13>;
|
||||
atmel,clk-output-range = <0 132000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@fffff200 {
|
||||
board {
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mmc0: mmc@f0000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
|
||||
cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1: mmc@f8000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
dmas = <0>, <0>; /* Do not use DMA for dbgu */
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART1 */
|
||||
usart0: serial@f001c000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART0 */
|
||||
usart1: serial@f0020000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
|
||||
dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
|
||||
dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
|
||||
rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
|
||||
usart3: serial@f8024000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi1: spi@f8008000 {
|
||||
cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
|
||||
};
|
||||
|
||||
sckc@fffffe50 {
|
||||
slow_osc: slow_osc {
|
||||
atmel,osc-bypass;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@60000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc;
|
||||
atmel,pmecc-cap = <8>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bs";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
kernel-a@e0000 {
|
||||
label = "kernel-a";
|
||||
reg = <0xe0000 0x500000>;
|
||||
};
|
||||
|
||||
kernel-b@5e0000 {
|
||||
label = "kernel-b";
|
||||
reg = <0x5e0000 0x500000>;
|
||||
};
|
||||
|
||||
rootfs-a@ae0000 {
|
||||
label = "rootfs-a";
|
||||
reg = <0xae0000 0x3000000>;
|
||||
};
|
||||
|
||||
rootfs-b@3ae0000 {
|
||||
label = "rootfs-b";
|
||||
reg = <0x3ae0000 0x3000000>;
|
||||
};
|
||||
|
||||
user@6ae0000 {
|
||||
label = "user";
|
||||
reg = <0x6ae0000 0x14e0000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
usb0: gadget@00500000 {
|
||||
atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
};
|
||||
|
||||
usb1: ohci@00600000 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
|
||||
atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
atheros {
|
||||
compatible = "atheros,ath6kl";
|
||||
atheros,board-id = "SD32";
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user