SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: add support for the GnuBee Personal Cloud One

Browse Source 
The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com
    It is a low-cost, low-power, network-attached storage device.

    Specifications:

    - SoC: MediaTek MT7621AT
    - RAM: DDR3 512 MB
    - Flash: 32 MB
    - Six SATA ports for 2.5" Drives
    - One micro SDcard
    - One USB 3.0
    - Two USB 2.0
    - Gigabit Ethernet: 1 x WAN and 1 x LAN
    - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1
    - Four GPIOs available on a pin header

    Flash instructions:

    The GnuBee Personal Cloud One ships with libreCMC installed.
    libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt.
    As such one can upgrade using the webinterface or sysupgrade.

    Das U-Boot has multiple options for recovery or updates including :

    - USB
    - http
    - tftp

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use switchdev led trigger, all interfaces are in vlan1; rename leds
according to board.d setting; remove ge2 group from the pinmux, this
group doesn't exist in the driver]
Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
L. D. Pinney
2017-07-22 09:15:56 +08:00
committed by Mathias Kresin
parent 4faf314933
commit 77645ffcd9
7 changed files with 141 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
target/linux/ramips/base-files/etc/board.d/01_leds Executable file → Normal file
View File

@@ -183,6 +183,10 @@ fonera20n)
set_usb_led "$board:orange:usb"
set_wifi_led "$board:orange:wifi"
;;
gb-pc1)
ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10"
;;
gl-mt300a|\
gl-mt300n|\
gl-mt750)

4
target/linux/ramips/base-files/etc/board.d/02_network
View File

@@ -186,6 +186,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
gb-pc1)
ucidef_add_switch "switch0" \
"0:lan" "4:lan" "6@eth0"
;;
gl-mt300n-v2)
ucidef_add_switch "switch0" \
"1:lan" "0:wan" "6@eth0"