SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

bmips: add support for Netgear EVG2000

Browse Source 
The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with
two internal antennas integrated in the main PCB.

Hardware:
 - SoC: Broadcom BCM6369
 - CPU: dual core BMIPS4350 V3.1 @400Mhz
 - RAM: 64 MB DDR
 - Flash: 16 MB parallel NOR
 - LAN switch: Broadcom BCM53115, 5x 1Gbit
 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
 - USB: 2x 2.0
 - Buttons: 2x, 1 reset
 - LEDs: 10x
 - FXS: 2x
 - UART: yes

Installation via CFE web UI:
  1. Power off the router and make a temporal TX-RX shortcircuit on the
     serial pins.
  2. Power on the router and wait 3 or more seconds
  3. Remove the TX-RX shortcircuit
  4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
     firmware
  5. Wait a few minutes for it to finish

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
This commit is contained in:
Daniel González Cabanelas
2023-06-10 21:05:33 +02:00
committed by Álvaro Fernández Rojas
parent 8fcfb21b16
commit 71a6f45fdf
5 changed files with 260 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
target/linux/bmips/bcm6368/base-files/etc/uci-defaults/09_fix_crc
View File

@@ -4,6 +4,7 @@
case "$(board_name)" in
comtrend,vr-3025u |\
netgear,evg2000 |\
observa,vh4032n)
mtd fixtrx firmware
;;