SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

lantiq: kernel 4.14: update dts files

Browse Source 
Updated the devicetree source files to make use of the following
upstreamed drivers:

 - xrx200 ethernet phy
 - reset controller unit
 - dwc2
 - fpi

Use our custom xrx200 ethernet phy compatible to support boards, which
have switched the vr9 revision during lifetime, with a single devicetree
source file.

By switching to the dwc2 driver + usb phy framework, we don't need to used
our custom gpio power patch and can use a fixed regulator instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Hauke Mehrtens
2017-11-13 22:39:01 +01:00
committed by Mathias Kresin
parent f519fea4c6
commit 6eaf8b3d89
38 changed files with 793 additions and 158 deletions
Download Patch File Download Diff File Expand all files Collapse all files

93
target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi
View File

@@ -46,8 +46,10 @@
};
watchdog@803f0 {
compatible = "lantiq,wdt";
compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
reg = <0x803f0 0x10>;
regmap = <&rcu0>;
};
};
@@ -91,25 +93,81 @@
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xrx200";
reg = <0x203000 0x1000>;
/* irq for thermal sensor */
interrupt-parent = <&icu0>;
interrupts = <115>;
};
compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
reg = <0x203000 0x100>;
ranges = <0x0 0x203000 0x100>;
big-endian;
xbar0: xbar@400000 {
compatible = "lantiq,xbar-xway";
reg = <0x400000 0x1000>;
gphy0: gphy@20 {
compatible = "lantiq,xrx200-gphy";
reg = <0x20 0x4>;
resets = <&reset0 31 30>, <&reset1 7 7>;
reset-names = "gphy", "gphy2";
};
gphy1: gphy@68 {
compatible = "lantiq,xrx200-gphy";
reg = <0x68 0x4>;
resets = <&reset0 29 28>, <&reset1 6 6>;
reset-names = "gphy", "gphy2";
};
reset0: reset-controller@10 {
compatible = "lantiq,xrx200-reset";
reg = <0x10 4>, <0x14 4>;
#reset-cells = <2>;
};
reset1: reset-controller@48 {
compatible = "lantiq,xrx200-reset";
reg = <0x48 4>, <0x24 4>;
#reset-cells = <2>;
};
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x18 4>, <0x38 4>;
status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
#phy-cells = <0>;
};
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x34 4>, <0x3c 4>;
status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
#phy-cells = <0>;
};
reboot@10 {
compatible = "syscon-reboot";
reg = <0x10 4>;
regmap = <&rcu0>;
offset = <0x10>;
mask = <0x40000000>;
};
};
};
fpi@10000000 {
compatible = "lantiq,xrx200-fpi", "simple-bus";
ranges = <0x0 0x10000000 0xf000000>;
reg = <0x1f400000 0x1000>,
<0x10000000 0xf000000>;
regmap = <&rcu0>;
offset-endianness = <0x4c>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xeefffff>;
reg = <0x10000000 0xef00000>;
localbus: localbus@0 {
#address-cells = <2>;
@@ -191,12 +249,14 @@
usb0: usb@e101000 {
status = "disabled";
compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200";
compatible = "lantiq,xrx200-usb";
reg = <0xe101000 0x1000
0xe120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
phys = <&usb_phy0>;
phy-names = "usb2-phy";
};
usb1: usb@e106000 {
@@ -206,6 +266,8 @@
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
phys = <&usb_phy1>;
phy-names = "usb2-phy";
};
eth0: eth@e108000 {
@@ -219,6 +281,9 @@
>;
interrupt-parent = <&icu0>;
interrupts = <75 73 72>;
resets = <&reset0 21 16>, <&reset0 8 8>;
reset-names = "switch", "ppe";
lantiq,phys = <&gphy0>, <&gphy1>;
};
mei@e116000 {