SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

lantiq: kernel 4.14: update dts files

Browse Source 
Updated the devicetree source files to make use of the following
upstreamed drivers:

 - xrx200 ethernet phy
 - reset controller unit
 - dwc2
 - fpi

Use our custom xrx200 ethernet phy compatible to support boards, which
have switched the vr9 revision during lifetime, with a single devicetree
source file.

By switching to the dwc2 driver + usb phy framework, we don't need to used
our custom gpio power patch and can use a fixed regulator instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Hauke Mehrtens
2017-11-13 22:39:01 +01:00
committed by Mathias Kresin
parent f519fea4c6
commit 6eaf8b3d89
38 changed files with 793 additions and 158 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts
View File

@@ -3,6 +3,7 @@
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
@@ -26,12 +27,6 @@
reg = <0x0 0x7f00000>;
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware = "lantiq/xrx200_phy11g_a22.bin";
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
@@ -98,6 +93,18 @@
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
};
};
usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&eth0 {
@@ -161,6 +168,14 @@
};
};
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
&gphy1 {
lantiq,gphy-mode = <GPHY_MODE_GE>;
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -271,13 +286,20 @@
};
};
&usb_phy0 {
status = "okay";
phy-supply = <&usb_vbus>;
};
&usb_phy1 {
status = "okay";
phy-supply = <&usb_vbus>;
};
&usb0 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
&usb1 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};