forked from Ivasoft/openwrt
ar71xx: add support for 8devices Rambutan development board
Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka <mantas@8devices.com> [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
committed by
Piotr Dymacz
parent
43a7a1a05e
commit
68b5d34f69
@@ -137,6 +137,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
||||
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
|
||||
obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o
|
||||
obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
|
||||
obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
|
||||
obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o
|
||||
|
||||
Reference in New Issue
Block a user