forked from Ivasoft/openwrt
ar71xx: add support for 8devices Rambutan development board
Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka <mantas@8devices.com> [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Mantas Pucka
committed by
Piotr Dymacz
Piotr Dymacz
parent
43a7a1a05e
commit
68b5d34f69
@@ -1897,6 +1897,16 @@ config ATH79_MACH_LIMA
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_ETH
|
||||
|
||||
config ATH79_MACH_RAMBUTAN
|
||||
bool "8devices Rambutan board"
|
||||
select SOC_QCA955X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_NFC
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E316N_V2
|
||||
bool "COMFAST CF-E316N v2 support"
|
||||
select SOC_AR934X
|
||||
|
||||
@@ -137,6 +137,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
|
||||
obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
||||
obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
|
||||
obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o
|
||||
obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
|
||||
obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
|
||||
obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o
|
||||
|
||||
90
target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
Normal file
90
target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
Normal file
@@ -0,0 +1,90 @@
|
||||
/*
|
||||
* 8devices Rambutan board support
|
||||
*
|
||||
* Copyright (C) 2017 Mantas Pucka <mantas@8devices.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
|
||||
#include <asm/mach-ath79/ath79.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
#include <linux/platform/ar934x_nfc.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
#include <linux/platform_data/phy-at803x.h>
|
||||
#include "common.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
|
||||
static struct at803x_platform_data rambutan_ar8032_data = {
|
||||
.has_reset_gpio = 1,
|
||||
.reset_gpio = 17,
|
||||
};
|
||||
|
||||
static struct mdio_board_info rambutan_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &rambutan_ar8032_data,
|
||||
},
|
||||
};
|
||||
|
||||
static struct at803x_platform_data rambutan_ar8033_data = {
|
||||
.has_reset_gpio = 1,
|
||||
.reset_gpio = 23,
|
||||
};
|
||||
|
||||
static struct mdio_board_info rambutan_mdio1_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.1",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &rambutan_ar8033_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init rambutan_setup(void)
|
||||
{
|
||||
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
||||
ath79_register_nfc();
|
||||
ath79_register_usb();
|
||||
ath79_register_pci();
|
||||
ath79_register_wmac_simple();
|
||||
|
||||
mdiobus_register_board_info(rambutan_mdio0_info,
|
||||
ARRAY_SIZE(rambutan_mdio0_info));
|
||||
mdiobus_register_board_info(rambutan_mdio1_info,
|
||||
ARRAY_SIZE(rambutan_mdio1_info));
|
||||
ath79_register_mdio(0, 0x0);
|
||||
ath79_register_mdio(1, 0x0);
|
||||
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth1_data.phy_mask = BIT(0);
|
||||
ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
||||
ath79_eth1_pll_data.pll_1000 = 0x17000000;
|
||||
ath79_eth1_pll_data.pll_10 = 0x1313;
|
||||
ath79_register_eth(1);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board",
|
||||
rambutan_setup);
|
||||
|
||||
@@ -155,6 +155,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
|
||||
ATH79_MACH_R602N, /* P&W R602N */
|
||||
ATH79_MACH_R6100, /* NETGEAR R6100 */
|
||||
ATH79_MACH_RAMBUTAN, /* 8devices Rambutan */
|
||||
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
|
||||
ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
|
||||
ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
|
||||
|
||||
Reference in New Issue
Block a user