SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ramips: Add support for Wavlink WL-WN575A3

Browse Source 
This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug
wireless router with the following specifications:

 - CPU: MediaTek MT7628AN 580MHz
 - Flash: 8MB
 - RAM: 64MB
 - Ethernet: 2x 10/100 Mbps (switched)
 - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm
 - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm
 - Antennas: 4x external (2 per radio), non-detachable
 - LEDs: 4 programmable + LAN, WAN, POWER
 - Buttons: reset, WPS

Flashing instructions:

Factory U-boot launches a TFTP client if WPS button is pressed during power-on.
Rename the sysupgrade file and configure a TFTP as follows:

 - Client (WL-WN575A3) IP: 192.168.10.101
 - Server IP: 192.168.10.100
 - Filename: firmware.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
This commit is contained in:
Roger Pueyo Centelles
2016-11-06 13:00:38 +01:00
committed by John Crispin
parent a50243ea1f
commit 5f6e948551
6 changed files with 148 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/ramips/base-files/etc/board.d/01_leds
View File

@@ -312,6 +312,12 @@ whr-600d)
ucidef_set_led_default "power" "power" "$board:green:power" "1"
ucidef_set_led_default "router" "router" "$board:green:router" "1"
;;
wl-wn575a3)
ucidef_set_rssimon "wlan1" "40000" "1"
ucidef_set_led_rssi "wifi-low" "wifi-low" "$board:green:wifi-low" "wlan1" "1" "49" "0" "1"
ucidef_set_led_rssi "wifi-med" "wifi-med" "$board:green:wifi-med" "wlan1" "50" "84" "0" "1"
ucidef_set_led_rssi "wifi-high" "wifi-high" "$board:green:wifi-high" "wlan1" "85" "100" "0" "1"
;;
wrh-300cr)
set_wifi_led "$board:green:wlan"
ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"

1
target/linux/ramips/base-files/etc/board.d/02_network
View File

@@ -90,6 +90,7 @@ ramips_setup_interfaces()
whr-300hp2|\
whr-600d|\
witi|\
wl-wn575a3|\
wndr3700v5|\
wsr-1166|\
wsr-600|\