SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for D-Link DAP-2680 A1

Browse Source 
Specifications:
 * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R
 * QCA9984, 802.11ac Wave 2 3T3R
 * Gigabit LAN Port (AR8035), 802.11at PoE

Installation:
 * Factory Web UI is at 192.168.0.50
   login with 'admin' and blank password, flash factory.bin
 * Recovery Web UI is at 192.168.0.50
   connect network cable, hold reset button during power-on and keep it
   pressed until uploading has started (only required when checksum is ok,
   e.g. for reverting back to oem firmware), flash factory.bin

After flashing factory.bin, additional free space can be reclaimed by
flashing sysupgrade.bin, since the factory image requires some padding
to be accepted for upgrading via OEM Web UI.

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
This commit is contained in:
Sebastian Schaper
2020-12-02 21:31:19 +01:00
committed by Adrian Schmutzler
parent b077accb9c
commit 5b58710fad
6 changed files with 113 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@@ -25,7 +25,8 @@ case "$board" in
dlink,dap-2230-a1)
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
dlink,dap-2660-a1)
dlink,dap-2660-a1|\
dlink,dap-2680-a1)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;