SW/openwrt
2
0
Fork 0
forked from Ivasoft/openwrt
Code Pull Requests Activity

ath79: add support for Joy-IT JT-OR750i

Browse Source 
Specifications:
 * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM
 * 802.11n 2T2R (external antennas)
 * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas)
 * 3x 10/100 LAN, 1x 10/100 WAN
 * UART header with pinout printed on PCB

Installation:
 * The device comes with a bootloader installed only
 * The bootloader offers DHCP and is reachable at http://10.123.123.1
 * Accept the agreement and flash sysupgrade.bin
 * Use Firefox if flashing does not work

TFTP recovery with static IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server at 192.168.0.66
 * Keep the reset button pressed for 4 seconds after connecting power

TFTP recovery with dynamic IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server with a DHCP server running at the same address
 * Keep the reset button pressed for 6 seconds after connecting power

Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
This commit is contained in:
Vincent Wiemann
2021-06-20 16:56:21 +02:00
committed by David Bauer
parent f1b98fa4fa
commit 55b4b36552
5 changed files with 153 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@@ -225,6 +225,9 @@ glinet,gl-x750)
hak5,lan-turtle)
ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1"
;;
joyit,jt-or750i)
ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0"
;;
meraki,mr12|\
tplink,cpe210-v2|\
tplink,cpe210-v3)

5
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@@ -282,6 +282,11 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
joyit,jt-or750i)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
;;
librerouter,librerouter-v1)
ucidef_add_switch "switch0" \
"0@eth0" "5:wan" "6@eth1" "4:lan"

1
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@@ -25,6 +25,7 @@ case "$FIRMWARE" in
comfast,cf-wr650ac-v2|\
devolo,dlan-pro-1200plus-ac|\
devolo,magic-2-wifi|\
joyit,jt-or750i|\
qxwlan,e1700ac-v2-8m|\
qxwlan,e1700ac-v2-16m|\
qxwlan,e600gac-v2-8m|\